Duwan GSZH-1500 Rotating Grating Cleaning Machine
Solid-liquid separator
Rotary Fine Mesh Debris Separator
Equipment Name ：Mechanical格栅
Technical Specifications
The housing is made of stainless steel 304.
Channel width: 1200mm, depth: 1360mm, lifting height: 800mm
Drive motors, brush motors within the supply scope
The field operation box features local start/stop functionality and does not require connection to the DCS. The material is 304 stainless steel.
Treatment capacity of not less than 9,000 m³/day
Pitch Material: Bar Spacing 5mm
Sludge Concentration: ≥5%
8、Motor Protection Grade: IP55
9、Power supply: 380V/50Hz.
10、Insulation Grade: F
Performance Warranty: Ensures cleanlinessRemoval efficiency of debris in water > 95%
Key Product Features:
1. Compact structure, attractive appearance, and easy for hoisting and maintenance.
2. Dual electrical and mechanical overload protection control for safe operation and reliable performance.
3. Low energy consumption, low noise, and high waste removal rate.
4. High chain sealing, no entanglement.
5. Transmission components and main underwater parts are made of anti-corrosion materials, with all materials except stainless steel being zinc-plated for corrosion protection, ensuring a lifespan of over 25 years.
Product Technical Specifications:
1. The rack has sufficient strength and rigidity.
2. The cleaning machine's grille bars feature an assembled structure, with a rational and reliable connection between the bars and the frame.
3. The degreaser operates with balance, reliability, and there is no oil leakage at the sealing points.
4. The tine strength and rigidity meet the rated load requirements.
5. The齿耙污物清除机构is designed for clean slag removal with adjustable positioning.
6. The degreaser is equipped with both mechanical and electrical overload protection devices to prevent damage to the transmission system, sprockets, and other components due to overload.
7. The welding parts of the cleaning machine meet the requirements of JJ12.3.
8. The grating body and its components of the degreaser are treated with zinc coating for corrosion prevention, excluding stainless steel materials, and surface painting is conducted in accordance with the provisions of JG/T50 11.12.
9. The water part of the grille cleaner is equipped with a stainless steel protective cover, which boasts an aesthetically pleasing and practical design, as well as reliability.
10. The cleaning machine operates at a noise level not exceeding 75dB(A).
11. The cleaning machine must run for at least 12 hours on no-load and at least 2 hours under field load testing.
Duwan Environmental Rotation Grate Cleaning Machine with Matching Control Cabinet and Terminal Box Description
1Control cabinet
The field-mounted stainless steel control cabinet is specifically designed and matched for our diving motor, composed of components such as air circuit breakers, AC contactors, thermal relays, intermediate relays, and motor integrated protectors. It offers two control methods: local control and remote control, which can be switched using a changeover switch. The control cabinet is available in indoor and outdoor types, with installation options including wall-mounted and cabinet-style.
1Scope of Use
Suitable for controlling AC rated voltage of380VFrequency:50HZThree-phase squirrel-cage asynchronous motor. Power15KWThe direct start method is adopted for models and below (self-coupled voltage reduction or soft start can also be used upon customer request). The control cabinet provides protections for the submersible motor, including overload, phase loss, short circuit, water leakage, and overheating. Depending on the customer's configuration requirements, four structural forms are available: one control for one, one control for two, one control for three, and one control for four.
21. Job Conditions
l Surrounding0Air temperature at high altitudes does not exceed+40℃，0Not less than-10℃；
l Installation ground altitude not exceeding2000Rice
l Non-explosive environments; no gases, conductive dust, or other substances present that are capable of corroding metals or damaging insulation.
l Do not use in environments where conductive contamination is present or where non-conductive contamination may become conductive due to anticipated condensation.
3Performance Characteristics
l Overload protection does not activate when the controlled motor's rated current is exceeded for a long period; exceeds1.2At rated current multiple20Cut power within minutes and indicate fault signal. Immediately cut power and indicate fault signal if phase is missing.
l The motor can be stopped at both start-up and running positions.
l Available85~110%USOperates reliably across any voltage range, with its release voltage not exceeding75%USAvailable in quantities not less than20% US；
l In the event of a short circuit in the motor and its controlled circuit during startup and operation, the power supply can be instantaneously disconnected, effectively protecting electrical equipment.
l Leak protector for oil chamber water ingress30%Alarm indicator, but does not cut off power.
l Stator winding temperature exceeds125At °C, an alarm indicator will activate and the power will be disconnected if the heat protection wire is not connected or the temperature does not return.125Below 0°C, engine start is refused.
l Please refer to the electrical schematic diagram for control cabinet wiring details.
4） Please use
l Verify wiring correctness according to the electrical schematic diagram.
l Verify that the motor power matches and set the time relay and thermal relay adjustment values properly.
l Receive Operation: Close the air switch, connect the power, the indicator light illuminates, and switch the toggle switch to the receive position. Press the start button, and the blender begins to activate.
l Automatic Control: Switch the toggle switch to the automatic position to accept remote control signals for automatic operation.
2Terminal box
l According to customer requirements, configurable terminal boxes are available for intermediate connections between mixers and control rooms.
l Signal and power lines must be installed in separate conduits; they must not be mixed.
l Terminal boxes and control rooms use DC signals for long-distance transmission without signal attenuation.
Maintenance and care
Products come with a 30-day money-back guarantee, a 90-day exchange policy, and a 1-year free warranty. Lifetime repair service is available. If technical assistance is needed during use, the company has set up a professional customer service team for marketing services, which provides free pre-sales, in-sales, and after-sales technical consultation and installation guidance to users, resolving any issues raised by customers.
