Hydraulic Grab-type Sediment Cleaning Machine
Rope-Driven格栅Cleaning Machine Installation Diagram
Wastewater Pump Station Inlet Fine Grating
Jiangsu Du'an Environmental ProtectionThe supplied grating machine should include the main body of the equipment, drive unit, chain plate, chain wheel, rake teeth, water-stop rubber, electric control cabinet, and cabinet posts, along with all accessories. Each set of equipment includes a motor rain shield, and the material required is 304 stainless steel.
Jiangsu Du'an Environmental ProtectionProvide installation of all fasteners (including pre-buried anchor bolts, nuts, washers, etc.), and complyUsage Requirements.
Technical Requirements
1. Normally, the格栅cleaning machine operates at intervals, but it can run continuously for 24 hours if necessary.
2. The格栅cleaning machine is set in the inlet channel to collect and remove larger particles and floating debris, and to discharge the waste matter through the discharge outlet.
3. The cleaner is installed in the channel, with an aesthetically pleasing and spacious upper platform design that does not affect the surrounding environmental hygiene.
4. Upon resuming operation after a period of downtime, the rake cleaning mechanism can remove accumulated debris from a fully blocked grate.
5. All drive components of the equipment are above the water surface, and maintenance openings are provided above the frame. In the event of an accidental incident or for maintenance and repairs, staff can perform their work directly through the maintenance openings on the work platform, making repairs and maintenance convenient. During installation, simply hoist the equipment into place and weld the base plates to the pre-buried steel plates on the ground level of the channel sides.
6. The scraper walking mechanism is flexible, stable, and has reliable braking. The positioning accuracy is ≤5mm. The cleaning machine features a reliable mechanical over-torque protection device to ensure safe operation.
7. The drive unit is equipped with a protective cover at the top of the grille, featuring overload protection. The speed of the scraper meets the requirements of the on-site process and installation.
8. The grid underwater sprockets and chains are equipped with anti-blocking protection devices, ensuring reliable operation.
9. Motor design must comply with IEC standards, and the rated power of the motor must exceed the actual power.1.5 times the required power, F-grade insulation, 3P power supply, 380V, 50Hz, IP65 protection rating.
10. Electrical Protection: The overload protection device for electrical appliances uses a thermal relay, which automatically shuts down and alarms when a mechanical failure or overloading occurs. The device operates sensitively and reliably.
13.1.3 Electrical Requirements
Locally mounted electrical control box (1 control, 304 stainless steel housing, IP55) is supplied as a complete set for grate machines. The power and control cables from the control box to the grate machine, as well as cable fasteners, are to be supplied by the installation unit. Technical requirements for the control box and control are detailed in the electrical and control clauses.
13.1.4 Self-Control Requirements
Each grating machine must have the function of on-site stepless control for start/stop and be equipped with PLC remote control capabilities. Its electrical control cabinet should at least have the following signal interfaces:
Input Signal (Passive Contact): Start/Stop Control Signal
Output Signal (Passive Contact): Manual/Automatic Signal
Operating Signal
Comprehensive fault signal.
Passive Contact Signal Logic: All signals are positive logic signals.
Signal contact capacity: 220V, 5A.
The signal of the grate machine and the plant controller are connected via hardwiring.
The general standard directory to be followed during the design, manufacturing, inspection, packaging, transportation, and installation of Jiangsu Du'an Environmental Protection Machinery's grate products is as follows:
JB2932-86 Water Treatment Equipment Manufacturing Technical Conditions
Equipment Name: Rotating Grate Cleaning Machine | Equipment Tag Number: | |||||
Equipment Location: | Quantity (Units): | |||||
Manufacturer: Jiangsu Du'an Environmental Protection | Equipment Model: | |||||
Item | Process and Technical Parameters | Jiangsu Du'an Environmental Protection Response Parameters | ||||
Please provide the Chinese content you would like to have translated into American English. Please provide the Chinese content to be translated. Please provide the Chinese content to be translated. Quality
| Name | Raw Water | ||||
Main Ingredients | Water, Sand | |||||
Temperature (℃) | Room Temperature | |||||
Density (kg/m³) | 1050 | |||||
Viscosity (厘泊) | ||||||
PH | 4～10 | |||||
Sex Available Please provide the Chinese content to be translated. Numbers | Grille dimensions (m) | Channel width × Channel height = 2.0 × 2.55 | ||||
Single unit comparisonHigh Flow Rate (m³/s) | ≥1.59 | |||||
Bar Spacing (Net, mm) | 5 | |||||
Inclination angle | 75° | |||||
Water depth in front of the fence | 1.65 m | |||||
Please provide the Chinese content that needs to be translated into American English.
Structure | Type | Self-Cleaning Helical Rake污物清除机 | ||||
Transmission Method | ||||||
Dewatering Height (m) | Detailed illustrations attached | |||||
Material Material | Subject | Stainless Steel Material 304 | ||||
Tine | Nylon/304 Stainless Steel | |||||
Supporting accessories outside the main unit | Stainless Steel Material 304 | |||||
Drive Active Machine | Power (kW) | 2.2 | ||||
Power Supply | 380V 50HZ 3Ph | |||||
Ingress Protection (IP) Rating, Insulation Level | IP65, F-grade | |||||
Supplied Merchandise Fan Encircle | Main Engine Propulsion Engine Base Coupling and Guard Anchoring Bolt Lubrication System Random Attachments Other | |||||
Please provide the Chinese content to be translated. Ming | The rotary fine格栅cleaning machine includes the main unit, drive assembly, electrical control cabinet, local control box, installation accessories, spare parts, and single-use lubricating oil. 2. See general and special technical requirements for machinery and equipment. | |||||
