Stainless Steel Mixed Liquid Sand and Water Separator
Duane LSSF-420 Sand and Water Separator
Horizontal shaft sand-water separator
LSSF-420 Sand and Water Separator Description:
1.A sand-water separator, including a vortex sedimentation pool1Separator and Sand-Water Separation Pond15), Hydrocyclone Sedimentation Tank1) Equipped with a main shaft5），Spindle (Main)5Two drive gears are installed at the top.8Sedimentation Basin; Swirling Sedimentation Tank1Top-mounted fixed frequency motor6Variable Frequency Motor6The output end is connected to one of its drive gears.7)，One Transmission Gear7With the second transmission gear8Interlocking connection, characterized by: main shaft (5Internal hollow, vacuum lift pump3Through the main shaft5Enter the vortex sedimentation tank.1Bottom sand hopper2) in the said main shaft5Lower end connected to impeller mechanism4The sand-water separation pond15Equipped with a screw conveyor.16), Sand and water separator pond15Top-mounted collecting trough11)，Water Collecting Trays11Bottom connects to overflow board.12）；The water collecting trough11One end connects to the energy-absorbing panel.14），Dissipation Plate14Top-mounted swirl separator13The swirling sand sedimentation tank;1Through overflow pipe9）and its row of sand pipes10Connect to the cyclone separator13The top outlet and inlet of the overflow; the said air-lift pump;3Through sand washing pipe20And-Keep Tube21Pipe Connector for Intake Air Tube23)，Intake Manifold23A row of sand pipes10Through the second-row sand pipe (22Connection; said vortex sedimentation tank1Inlet is located along the tangent direction.27)，Inlet27Doppler flow velocity meter is installed.24）。
Features and Working Principle of Spiral Sand Water Separator:
The sedimentation and sand-conveying units of the spiral sand-water separator are a closed, integrated structure, featuring compact design, light weight, high operational reliability, and minimal maintenance requirements.
Helical sand-water separator with separation efficiency up to96%～98%Can be separated to particle size ≥0.2nnParticles, recovery rate not less than98%Diameter greater than0.1mmThe sand and gravel removal rate is not less than80%。
The spiral sand-water separator's inlet and outlet pipe diameter design prevents clogging by water impurities.
The spiral sand-water separator and auxiliary components are configured for both continuous and intermittent operation requirements.
UThe type features a spiral groove with an adequate number of replaceable linings, boasting a simple structure, long service life, and ease of replacement.
There are no high-speed moving parts in the equipment, so the screw wears down very little and rarely requires maintenance.
The drive unit features an axis-mounted reducer, with the output shaft directly connected to the auger.
Spiral sand-water separator featuring a shaftless spiral and liner strip.UComprised of shapes, water tanks, baffles, and drive units, etc. When the sand-water mixture is introduced into the water tank from the top end of the separator, larger particles like sand will settle.UAt the bottom of the mold, under the push of the spiral, sand particles follow the oblique positioningUThe mold groove bottom is elevated, continuing to push a distance after leaving the liquid surface, and the sand is discharged through the sand outlet after it is fully dehydrated.
LSSF-420Sand and water separator installation instructions:
1Check the installation dimensions of the spiral sand-water separator, ensure the power supply is intact, and start the spiral sand-water separator.
2Conduct a no-load test to inspect the sand-water separator's operation.
3Ensure that all bolts at the connection points of the spiral sand water separator are securely fastened during installation.
4Power rating should be determined based on operating conditions, conveying medium, installation angle, and conveying length.
5The Spiral Sand Water Separator can be customized to meet specific user sizes and requirements.
