Pharmaceutical Mixing Blender

Slow-speed mixer

JBK Flocculation Tank Agitator

Voltage Rating: 380V

Gearbox: Gear reducer

Gearbox Brand: Shuntian

Pharmaceutical Mixing BlenderJBK Box Type Blender Product Introduction

Anchor and frame agitators are a type of paddle agitator, collectively known as anchor-frame agitators. This type of agitator features a relatively large impeller blade diameter compared to the tank diameter. Its structure is robust, capable of handling large volumes of material. If the bottom shape of this agitator is similar to the bottom shape of the reaction vessel's lower head, it is commonly referred to as an anchor agitator. Frame agitators typically have a larger diameter, usually taken as the inner diameter of the reactor.2/3 to 9/10, 50 to 70 rpm. The frame type agitator has a smaller gap with the reactor wall, which is conducive to the heat transfer process. At high speeds, the liquid propelled by the agitator blades pulls the stationary layer down from the reactor wall; at low speeds, the scraper-equipped agitator promotes excellent heat conduction. This type of agitator is commonly used for heat transfer, crystallization operations, and stirring of high-viscosity liquids, high-concentration sludges, and settling sludges.

　　JBK Model Frame-Type Mixer Significance

　　I. Full Height Single Layer Propeller Blade II. Full Height Double Layer Propeller Blade III. Half Height Single Layer Propeller Blade

　　JBK Series Frame Type Concrete Mixer - Applications and Scope

主要用于 waterworks and sewage treatment plants for dissolving and agitating chemicals.

　　JBK Box Type Concrete Mixer Performance Features:

Select the appropriate stirrer based on the physical properties, capacity, and stirring purpose of the medium. Stirrers can greatly enhance the rate of chemical reactions and improve production efficiency. Frame stirrers are generally used for stirring paste-like materials, and the stirring speed is determined by...60-130 rpm is ideal

　　JBK Frame-Type Concrete Mixer Structural Features:

Used for low viscosity liquids, the ratio of the impeller diameter to the drum diameter is anchoring-type.0.7 to 0.9, for high-viscosity liquids, it's 0.8 to 0.95. The speed is typically 10 to 50 rpm. To increase the stirring range and remove residue or liquid layers from the tank walls, the outer frame of the anchor stirrer should be close to the inner wall of the tank. The bottom shape, to fit the tank bottom's contour, can be elliptical, conical, and so on. To expand the stirring range for high-viscosity materials and enhance the impeller's rigidity, additional vertical blades and crossbeams are often added to the anchor and frame designs, resulting in a variety of structural shapes for the anchor frame.

　JBK Box Type Mixing Machine Performance Parameters

Note: The price marked on this item is a temporary price for reference only. The actual price is negotiable and depends on the material and size. For the specific price, please consult us, and the real-time quote is to be taken as the final price. Therefore, the quote is for reference purposes only.;

Technical Description of Box Type Mixers

 Box type mixerSelect the appropriate mixer based on the physical properties, capacity, and mixing objectives of the medium, as it can greatly enhance the rate of chemical reactions and improve production efficiency.Frame-type mixerGenerally used for stirring porridge-like materials.
A variant of the paddle mixer, it features a robust structure and is capable of handling large volumes of material. When the bottom shape of such a mixer resembles the bottom shape of a reactor's head, it is typically referred to as an anchor mixer. The diameter is usually 2/3 to 9/10 of the reactor's internal diameter, operating at 50 to 70 rpm. For low-viscosity liquids, the ratio of the impeller diameter to the tank diameter for an anchor impeller is 0.7 to 0.9, while for high-viscosity liquids, it is 0.8 to 0.95, with a speed range of 10 to 50 rpm. The smaller gap between the mixer blades and the reactor wall facilitates heat transfer. At high speeds, the liquid moved by the blades helps to dislodge the stationary layer from the reactor wall; at low speeds, a scraper-type mixer promotes effective heat conduction. This type of mixer is commonly used for heat transfer, crystallization operations, and mixing of high-viscosity liquids, high-concentration sludges, and settling sludges.
Anchor type, belonging to the same category, collectively referred to as anchors. To increase the mixing range and remove residue or liquid layers from the tank wall, the perimeter of the anchor should be close to the inner wall of the mixing tank. The bottom shape, to accommodate the tank bottom's contour, can be elliptical, conical, and so on. To enhance the mixing range for high-viscosity materials and increase the rigidity of the impeller, additional vertical blades and crossbeams are often added to the anchor and frame types. This results in a variety of structural shapes for the anchor frame design.
High viscosity suitable for200～300Pa·s。

Product Structure:
The connection method between the anchor and the agitator shaft is similar to paddle-style, with the end of the impeller connected to the shaft being shaped like a semicircular shaft ring. Then, the two semicircular rings on both sides of the blades are clamped onto the agitator shaft with bolts, while the blade and agitator shaft are secured using through-shaft bolts. Due to the large outline dimensions of the impeller, for ease of installation and removal, the blades are most often connected with bolts, with only small sizes being cast or welded. The impeller is predominantly made of flat steel or angle steel, and reinforced steel plates can also be used to enhance the strength of the impeller.

Flowing state

Horizontal circular flow at different heights

Duane JBK Matching SiteControlControl cabinet

Matching equipment control cabinets and on-site push-button boxes (one control, one box).

Field control box byLan Shen GroupSupplied with, control box featuring transparent double doors, made of stainless steel304Material: The bracket is also made of stainless steel.304Material: can be securely fastened; board thickness not less than1.5mmOutdoor protection grade:IP55Indoor protection grade not less thanIP4XThe box is equipped with protective switches, control switches, and logic components, while the panel features a multi-functional meter, conversion switches, start/stop buttons, and an emergency stop button, as well as running indicator lights. In the event of a device malfunction, it can stop the equipment's operation.

Nanjing Lan ShenBased on the performance requirements of the provided equipment and the aforementioned control requirements,ManufacturingProvide a complete electrical control schematic for each control box, including wiring diagrams, a general layout of electrical component locations, numbered specific wiring diagrams, and a list of electrical component configurations.

Please provide the Chinese content to be translated.Circuit breakers, AC contactors, thermal relays (if required), inverters (if required), etc., primary electrical components (circuit breakers, contactors, thermal relays) are from Schneider,ABBOr Siemens products.

304Stainless SteelRegulate the inventory retention in the cabinetPLCThe system's connected terminal blocks are clearly labeled, and complete control drawings are provided for implementation.PLCAutomatic control.