MGL-150D Anchor Drilling Rig

1. Suitable for the following construction processes:

1.1 Anchoring is suitable for drilling methods such as rod drilling, casing drilling, and combined rod-casing drilling.

1.2 The jet spray is suitable for single, double, and triple jet spray methods.

By configuring different modules, it can be suitable for the following construction processes: 1.3 Excavation Dewatering, 1.4 Micro-piled Grouting

1.5 Geothermal Borehole (Well) Construction

2. Torque and RPM can be reasonably matched to meet actual needs. The push frame stroke is 3.4 meters, allowing for 3-meter drill pipe and casing composite drilling. Rotators with different torque can be configured according to various strata, enhancing the adaptability of the drilling rig.

3. Equipped with a crawler undercarriage, a high-positioned rotating platform, large-diameter leg cylinders, a 0.9-meter slide frame, and a hole opening support device, the drilling rig is extremely easy to move and position, and offers stability and reliability during drilling.

4. Equipped with a clamp卸扣器, it reduces the labor intensity and increases the efficiency of loading and unloading drill pipes and casing.

5. R&D has equipped corresponding drilling tools, capable of meeting the following construction processes.

5.1 Three-blade drill bit penetration, slag removal with mud. Suitable for high-speed drilling in soil and sand layers.

5.2 Air hammer drilling with air slag removal. (Highly configured cost, requires air compressors over 15 cubic meters, air hammer, and significant pollution.) Suitable for rock and broken layer construction.

5.3 Hole-bottom liquid-powered hammer drilling, mud waste discharged. (Low configuration cost, includes BW-320 pump, liquid-powered hammer, minimal pollution) Suitable for construction in layers with high water content such as broken layers, sand gravel layers, etc.

5.4 Tube Drilling

5.5 Drill Rod and Casing Composite Drilling

5.6 Single, double, triple vortex, fixed, oscillating spray, and other spray techniques.

Application Range of Pumps

This series of high-pressure mud pumps has been meticulously developed by our technical team to meet the needs and advancements of modern oil extraction and high-pressure grouting technologies. It is a lightweight, high-pressure transfer pump for water, oil, and high-density cement slurry, etc., representing a new generation of products. It boasts features such as rational parameters, advanced technology, reliable quality, excellent performance, and aesthetic design.

This series of high-pressure grouting pumps is suitable for the following fields:

1. Soft soil treatment, high-pressure selected jet grouting.

2. High-pressure water jet rock blasting and coal removal.

3. Hydraulic支柱Supply for Underground Coal Mines

4. Anchor with hydraulic expansion metal anchor rods, using high-pressure water pumping.

5. Large underground pipeline cleaning and descaling.

6. Industrial Pumps

7. Horizontal drilling through holes with high-pressure water jet.

8. Other uses: Grouting pumps.