Guangdong Tianyuan Environmental Protection Technology Co., Ltd. -- VOCs Emission Treatment -- Waste Gas Treatment
Institutional measures and countermeasures for waste gas prevention
1) Enhance regulation and control over the company's waste gas consumption.
2) For detailed information about our company, if the types of waste gases are complex, it is necessary to carry out classification collection and quality treatment. For inorganic waste gases, use water, acid, alkali solutions for absorption; for organic waste gases, use methods such as condensation, adsorption, and absorption.
3) Select reasonable and economically viable process treatments for the resource recycling and reuse of chemicals in waste gases, such as using activated carbon and carbon fiber materials to adsorb effective chemicals for recyclable use. The cost of VOCs waste gas treatment varies. Apply absorption and digestion processes for the resource recycling of waste. The use of adsorption and coupled catalytic combustion technology can achieve primary reconstruction. For chemicals that cannot be reused, incineration and advanced pyrolysis technology can be employed for harmless treatment.
Guangdong Tianyuan Environmental Protection Technology Co., Ltd. -- VOCs Emission Treatment -- Air Pollution Control;
Guangdong Tianyuan Environmental Protection Technology Co., Ltd. -- VOCs Emission Treatment -- Waste Gas Treatment
Water Absorption Method
When the concentration level is less than 1%, VOCs waste gas treatment plans can sometimes use tap water for absorption via a scrubber tower. The actual effectiveness of Huizhou's VOCs waste gas treatment is not as good as that of slightly alkaline solutions. Steam heating and analysis can be used for recovery, as some Chinese chlor-alkali plants collect steam or use heat exchangers during "chlorine water" analysis. In addition, adsorption methods using silicone rubber, activated carbon, positively charged exchangeable epoxy resins, etc., have also been employed, but due to high costs or incomplete technology, they have not been widely used.
The cold-suspension method utilizes the chemical property that substances have different saturated vapor pressures at different temperatures. By either reducing the system temperature or increasing the system pressure, it treats VOCs emissions in printing packaging, causing pollutants in the vapor phase to condense and be extracted from the exhaust.
Guangdong Tianyuan Environmental Protection Technology Co., Ltd. -- VOCs Emission Treatment -- Air Pollution Control;
Guangdong Tianyuan Environmental Protection Technology Co., Ltd. -- VOCs Emission Treatment -- Waste Gas Treatment
Key Parameters Design Scheme
1. Adsorption principle of activated carbon
Design Airflow: Q = 10,000 m³/h = 2.78 m³/s
Pipe specification: 600*600mm, cold rolled steel sheet folded, T=0.8mm.
2. Dry Test Filter Assembly
Output Volume: Q = 10,000 m³/h = 2.78 m³/s.
Flow Rate: 1 m/s, Total Filtration Area: 2.78㎡.
Dimensions: L1500 x W2000 x H1500mm.
Integrated with polypropylene ultra-fine fibers. Timely replacement and cleaning of pressure filter cloth.
Guangdong Tianyuan Environmental Protection Technology Co., Ltd. -- VOCs Emission Treatment -- Waste Gas Treatment
Huizhou VOCs Emission Treatment - Guangzhou Tianyuan Environmental Protection - VOCs Emission Treatment Solutions provided by Guangdong Tianyuan Environmental Protection Technology Co., Ltd. The company specializes in "Emergency Response Plans, Customized VOCs Solutions for Each Enterprise, Emission Permit, and Clean Production Audits." Adhering to the philosophy of "Dedication, Devotion to Service," we offer superior products and services. Call for inquiries! Contact: Manager Ding.
