Macau Stainless Steel Spray Tower Custom Sizes

 

The maintenance of a spray tower requires regular cleaning of floating debris in the water tank (cleaned daily) and checking the water level for refilling. Custom dust spray towers, the water level must not be below the pump intake. The normal water level is above the pump intake.200mmLocation, nozzle (cleaned every two weeks) - first remove the window screws and take off the clear plate. Dusting spray tower direct sales, wear protective gear and enter the tower to remove and clean the nozzle, then reassemble it and level the packing material. Regularly inspect the packing material for unevenness or being blown into a pile. If the dusting spray tower is not up to standard, make sure to level it promptly to maintain effective treatment!


 

PPSpray Tower Working Principle:

Wet waste gas is introduced into the purification tower through the wind pipe, passes through the packing layer, and undergoes a complete gas-liquid contact absorption and neutralization reaction with sodium hydroxide absorbent. After purification, the waste gas is then dehumidified and defogged by the defogging plate before being discharged into the atmosphere by the fan. The absorbent is pumped and pressurized at the bottom of the tower, sprayed from the top, and then recirculated back to the bottom for reuse. The purified waste gas meets local emission standards and is below the national emission standards.

 

Widely used in chemicals, electronics, metallurgy, electroplating, and textiles.(Synthetic fiber)Waste gas purification and treatment during the process of industries such as food, machinery manufacturing, etc., including flavoring food, manufacturing, washing, electroplating, electrolysis, and battery production.