Guangxi Spray Tower

 

Spray tower maintenance requires regular cleaning of floating debris in the water tank (cleaned daily) and checking the water level for refilling. Custom dust spray towers should ensure the water level is not below the pump intake. The normal water level should be above the pump intake.200mmLocation, nozzle (cleaned every half month) - First, remove the window screws and take off the transparent panel. Direct sales of dust removal spray towers. Wear protective gear before entering the tower to remove and clean the nozzle. After cleaning, reassemble and level the packing material. Regularly check if the packing is uneven or blown into a pile. Which dust removal spray tower is the best? It's important to level it promptly to maintain treatment effectiveness!


 

PPSpray Tower Working Principle:

Wet gas is introduced into the purification tower through the air duct, where it passes through the packing layer. The gas comes into full contact with the sodium hydroxide absorption liquid, undergoing a gas-liquid two-phase absorption and neutralization reaction. After purification, the wet gas is further dehumidified and demisted by the mist removal plate before being exhausted into the atmosphere by the fan. The absorption liquid is pressurized by a pump at the bottom of the tower and sprayed down from the top, then recycled back to the bottom for continuous use. The purified wet gas meets local emission standards and is below the national emission standards.

 

Widely used in chemical, electronic, metallurgical, electroplating, and textile industries(Synthetic Fiber)Waste gas purification and treatment in industries such as food, mechanical manufacturing, etc., including processes like flavoring food production, cleaning, electroplating, electrolysis, and lead-acid battery manufacturing.