Zeolite Wheel
Concentrated Wheel System for Adsorbing Large Volumes of Low-Concentration Volatile Organic Compounds(VOCs)After desorption, introduce the low airflow, high concentration waste gas into the incinerator for decomposition and purification. High airflow, low concentrationVOCs Waste gas,Through a rotating wheel with zeolite as the adsorption material, VOCs The purified gas, adsorbed by zeolite in the area of the rotating wheel, is discharged into the atmosphere through the chimney.,Further in another desorption zone, using180℃～230Small amount of warm air, temperature in degrees Celsius. TranslateVOCs The desorption gas, with its high concentration and low airflow, is then introduced into the incinerator for decomposition into carbon dioxide and water vapor.,The purified gas is discharged into the atmosphere through the chimney. This concentrated process significantly reduces fuel costs; the system is one of the technologies that save operation costs by handling high airflow and low-concentration organic waste gases. The process waste gas is removed of paint mist dust and particulate matter through a pre-filtering screen, and then adsorbed by a concentration wheel containing hydrophobic zeolite.VOCsThe clean air is then released back into the atmosphere. Due to the slow rotation of the wheel, it passes through the desorption zone and is desorbed by a small amount of high-temperature desorption air. The high-concentration waste gas desorbed is then fed into a small incinerator or a catalytic incinerator.VOCs The desorption process equipment is equipped with a secondary compensation heater to supply desorption hot air, aiming to save energy.
Zeolite wheel (also known as molecular sieve) adsorption concentration unit utilizes imported Japanese products. The adsorption material is zeolite, which has a crystal-like structure. The molecules are interconnected like a framework, creating numerous cavities. This results in a large number of micropores with strong adsorption capabilities, significantly surpassing those of other types of adsorbents in吸附质molecules.
The rotor is typically divided into three sections: a large sector and two smaller sectors. The large sector is for adsorbing organic matter, while the two smaller sectors are for cooling and high-temperature desorption, respectively. The rotor rotates at a certain speed, and after adsorption, the zeolite automatically moves to the desorption area for regeneration. This creates a simultaneous operation of adsorption concentration and desorption regeneration, enabling continuous production.
Gas containing organic solvents is purified to clean air after passing through a molecular sieve wheel. The wheel is continuously rotated by a motor, and when it enters the regeneration zone, the organic solvents adsorbed on the wheel are desorbed into the hot air. The airflow through the desorption wheel is only a fraction of the flow processed through the wheel.1/10～1/20And the concentration after concentration is that of the original.10～20 After the adsorbent material adsorbs a certain amount of organic solvent, it must be heated to regenerate, allowing the adsorbed organic solvent to desorb and restore its adsorption capacity. The desorption method for the adsorbent material involves using a circulation of hot air through the material. During the desorption process, a certain amount of waste gas containing high concentrations of organic solvents is produced. If this waste gas is directly released into the atmosphere, it can cause environmental pollution. Therefore, this waste gas must be technically treated to become a substance that does not harm the atmosphere.
Shandong Zhongcheng Liangchuang Environmental Protection Technology Development Co., Ltd. was established in2014Year, the company has been committed to the design, research and development, and manufacturing of coating products and environmental purification products for a long time. The company boasts strong technical capabilities, owns advanced processing equipment, refined technology, complete testing methods, and a sound quality control system. "Zhong Cheng" brand pressure air spray/Paint Booth, Dust Extraction System, Sanding and Dust Extraction Room, Environmental Sanding Bench, Gravity-Conveyor Rollers, Power Lift PlatformVOCWaste gas treatment equipment, paint mist purification and treatment system, catalytic combustion and other series of matching products, with product sales nationwide and exports to foreign countries.
Primarily produces custom-madeUVPhotocatalytic Oxidation, Environmental Protection Box, Spray Tower, Cyclone Tower, Catalytic Combustion, No-pump water mist spray cabinet, water spin spray cabinet, baking paint booth, polishing dust collector, portable spray booth, vacuum cleaner, smoke and oil purifier, welding smoke dust collector,Paint booths for furniture, automotive baking paint booths, dry spray cabinets, and dry spray rooms, various environmental protection equipment.
