Epoxy Resin Flooring Application Method

One, Preparations: Prior to the installation of the curing agent flooring, thorough preparations are necessary. Firstly, ensure the ground is level, making adjustments for any uneven areas. Additionally, clear away debris and dust from the surface to facilitate smooth construction.

Before application, the hardener needs to be diluted. Typically, you can dilute the hardener by adding an appropriate amount of water according to the instructions. The diluted hardener is easier to apply and better penetrates the ground.

Three, Apply the curing agent: Use a brush or spray gun to evenly apply the diluted curing agent to the ground. Pay special attention to the edges and corners during application to ensure an even coating. Do not miss any spots to avoid affecting the outcome.

After the curing agent dries, the ground needs to be ground. Grinding removes the rough surface areas, making the ground smoother. Additionally, grinding enhances the ground's adhesion, laying a solid foundation for subsequent construction.

Five, after sanding is complete, the curing agent can be applied again. This time, the application can be more even, resulting in a smoother surface. After applying, sanding should be done once more to ensure the surface is smooth and level.

Six, after the secondary curing agent has been applied and cured, the protective coating can be applied. The protective coating effectively protects the ground against wear and contamination. Ensure even application of the protective coating and do not miss any area.

That concludes the application methods for the curing agent flooring. By following the correct process and techniques, the ground can become harder, smoother, and flatter. Additionally, proper maintenance can extend the lifespan of the flooring.