I. The Application of Constant Temperature and Humidity Test Chambers
The equipment is primarily designed for electrical engineers, electronic products, their components, and other materials to test their adaptability to storage, transportation, and use under high and low temperature, as well as humid and wet conditions. This testing equipment is mainly used to simulate environmental conditions in accordance with national standards or customer-defined requirements, to assess the physical and other related properties of products under high and low temperature conditions. After testing, the performance of the products is evaluated through inspections to determine if they still meet the specified requirements for product design, improvement, certification, and factory inspection.
Section II: Main Technical Specifications of the Equipment
Temperature Range: -20℃ to -80℃; +150℃
2. Humidity Range: 20~98% R.H.
3. Temperature fluctuation: ±0.5℃
4. Temperature Deviation: ≤2℃
5. Cooling Rate: 0.7-1℃/min
Section 3: Reference Specifications 

Model  | Studio Size (mm)
(W·D·H)  Box Dimensions (mm)
（W·D·H）    

HS-50    320×350×450    800×840×1560    

HS-100    450×450×500    900×950×1610    

HS-150    500×500×600    950×1000×1710    

HS-225    500×600×750    1003×1050×1860    

HS-250    520×630×780    1060×1080×1890    

HS-500    700×800×900    1250×1200×1910    

HS-800    800×1000×1000    1250×1500×2010    

HS-010    1000×1000×1000    1450×1500×2010    

Note: Custom sizes available according to customer's technical requirements!
IV. Structural Characteristics of the Equipment
1. The equipment is mainly composed of the housing, refrigeration system, air circulation system, and control system.
2. The outer shell of the box is made of SUS304 stainless steel embossed sheet or Baosteel cold-rolled steel plate with electrostatic powder coating, while the inner lining is constructed from SUS304 stainless steel plate. The door features a large observation window in the middle, equipped with an observation light, allowing users to clearly view the test conditions of the samples.
3. The overall appearance is aesthetically pleasing and generous. The insulation layer is ultra-fine glass wool, featuring high strength and excellent thermal insulation properties.
4. The main temperature controller for this equipment is an intelligent digital temperature and humidity controller, easy to learn and operate, with different function level instruments compatible with each other. The input features a digital calibration system, with built-in common thermocouple and thermal resistance non-linear calibration tables for stable measurement. Equipped with on-off control and AI artificial intelligence adjustment functions, 0.2-grade accuracy, and multiple alarm modes. Features independent heating and cooling, and a unique BTHC balanced temperature control method.
5. The refrigeration system employs a fully enclosed imported reciprocating compressor set from Europe's TAIKANG, featuring mechanical single-stage refrigeration or a cascade low-temperature circuit system, with an automatic control and safety protection coordination system.
6. Humidity is circulated by the surface evaporation of a stainless steel humidifier.
7. Electrical appliances are executed using Schneider's product series, ensuring safety and stability.
V. Relevant Standards
GB 10589-89 Technical Conditions for High and Low Temperature Test Chambers
GB/T5170.2-1996 Method for Calibration of Basic Parameters of Environmental Test Equipment for Electrical and Electronic Products - Temperature Test Equipment
GB2423.1-89 Basic Test Procedures for Electrical and Electronic Products - Test A: Low Temperature Test Method
GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.1993 GB/T2423.4-1993
Section 6: Safety Protection Devices for Equipment
Overload, short-circuit, and leakage protection.
2. Grounding Protection
3. Over-temperature Protection
4. Overpressure and Overload Protection
5. To protect the equipment, all alarms will automatically shut off the power and emit audio alerts.
6. Humidity Shortage Protection
Section 7: Conditions at the Equipment's Usage Site
Temperature: 15℃~35℃
2. Relative Humidity: Not greater than 85%RH
3. No intense vibration or strong electromagnetic field interference nearby
4. Surroundings free of high concentration of dust and corrosive substances
5. No direct sunlight or other heat sources radiation
6. No strong air currents are present, and when forced air is required in the surrounding area, the airflow should not be directed directly onto the box.
7. The test box should be placed flat and kept level.
8. Sufficient space should be left around the testing box for easy maintenance and operations.
9. The installation site has good ventilation.
10. Good grounding
Section 8: Service Commitment
1. Free on-site installation, debugging, and operator training.
2. The product comes with a one-year warranty from the date of delivery to the user, except for the following circumstances:
a. Buyer's operation error led to human error and damage.
b. Other circumstances not to be borne by the supplier
3. Post-warranty paid services are provided.