The Siemens S7-1500 PLC interface module allows for distributed I/O expansion via interface modules, using the same I/O modules as the S7-1500 rack, providing enhanced expansion capabilities for the entire system. • Improved hardware design and functional combinations make selection simpler.SIMATIC ET 200MP is user-friendly, modular, and expandable, with distributed configuration for SIMATIC S7-1500 I/O modules. High channel density and fewer component types significantly simplify ordering, logistics, and spare parts inventory.
Supplementary US version of the grade controller
The IP20-rated ET 200MP I/O system is expandable, serving as a centralized I/O for S7-1500 or a distributed setup with PROFINET or PROFIBUS. Each workstation can accommodate 30 I/O modules. These modules have minimal variations, with all 35mm-wide modules featuring front connectors, greatly simplifying ordering, logistics, and spare parts inventory.
New benchmark for availability
The SIMATIC ET 200MP is a modular distributed I/O system suitable for various applications. It meets the IP 20 protection class and is intended for installation in control cabinets.
Configure distributed station with IO modules using SIMATIC S7-1500
Component models are limited; all modules with a width of 35mm are equipped with a unified front connector.
The pre-assembly position of the front connector allows for easy pre-wiring.
Channel-based diagnostics enable quick and clear identification of process errors, and reduce the frequency of equipment downtime.
The SIMATIC ET 200MP is extremely compact due to its high channel density. Its small footprint improves the utilization of control cabinet space. The unified 40-pin front connector simplifies ordering and spare parts inventory.
The I/O system can be organized in an expandable and universal manner using self-assembled backplane buses.
Each workstation can be expanded using 30 I/O modules, each with 32 channels. By assigning modules and diagnostic LEDs one-to-one to terminals and labels for clear arrangement, "expandable cable storage space" ensures a uniform appearance of workstations in the control cabinet.
The IO system of the S7-1500 controller sets a new performance benchmark, making it the superior control system: PROFINET IRT synchronous mode, clock rate up to 250 μs
The SIMATIC ET 200MP features a high-performance backplane bus for fast response times.
Integrated shielding design enhances the workstations' resistance to external EMC interference.
Digital Input Module, with extremely short input delay (50 μs)
Simulation Module, Conversion Time: 62.5µs rsp. 125 µs, 8 Channels
SIMATIC ET 200MP - Interface Module
The main modules of the IO workstation, along with the connection interface module (IM) for PLCs, link the SIMATIC ET 200MP to PROFINET or PROFIBUS, facilitating data exchange between higher-level controllers and I/O modules.
The ET 200MP is particularly suitable for equipment with large and very large configuration limits. Connections to PROFINET and PROFIBUS enable the ET 200MP to be installed centrally in control cabinets or distributed across equipment covering a wide area. After adding up to 12 PROFINET modules (with PROFIBUS), it can operate 30 modules.
