Oil temperature machine installation and operation instructions, overflow may occur. When the internal heat-conducting oil pressure exceeds the pressure difference between it and the expansion trough, the oil-gas mixture will be expelled from the expansion trough, causing an overflow. Overflow may lead to fires, resulting in injuries or casualties.

The heat transfer oil of the oil temperature machine, when compared to another high-temperature heat transfer medium like molten salt, has certain advantages in terms of price and service life of the heat transfer medium at operating temperatures above 400°C. However, it is significantly inferior in other aspects, especially in the complexity of system operation. The furnace tube arrangement is designed to neither trap air nor hold water, and it is equipped with a top manifold pipe, which, when compared to similar equipment, achieves a 5% energy-saving distribution. It operates with low resistance, high flow rate, and stable pressure; it is safe and durable.

To prevent such a terrible incident from occurring, how can we avoid the overflow of thermal oil in furnace? Below, let's understand it together based on common usage situations:

Oil temperature machine installation and operation instructions:

1. The rate of dehydration and temperature increase while driving is too fast, causing steam and low-boiling point volatiles to冲击胀大槽, leading to oil overflow. Solution: Strictly follow the temperature increase curve requirements for heating, and adjust the heating rate based on pressure fluctuations and exhaust conditions.

2. Multiple thermal equipment units are used in replacement, where high-temperature thermal oil rapidly flows into the low-temperature system and comes into contact with cold oil. As the cold oil absorbs heat, the low-boiling-point components vaporize and evaporate significantly. Solution: When the low-temperature thermal equipment is put into operation, the valves are gradually opened and the flow rate is gradually increased to achieve a gradual balance in the heat exchange between the hot and cold oils.

3. Defects in the hot oil pump or oil leakage in the system. Solution: Loosen and continuously heat, loosen the drain valve to allow the heat-conducting oil to flow through the furnace pipes and into the low-level oil storage tank.

How to Safely Use an Oil Temperature Machine:

When selecting an oil temperature machine manufacturer, be sure to check if their products have the following safety protection features:

1. The system cannot activate heating under no-pressure conditions, which prevents the heating tube from burning out due to dry heat.

2. Air start disengagement function: when the over-temperature temperature controller detects that the system temperature exceeds the design temperature of the equipment, it disconnects the main power switch of the equipment to ensure that the equipment will not cause a fire safety accident due to high temperature.

3. Ensure that the accessories used for the equipment are genuine and meet the equipment's requirements. Avoid using substandard parts, as it can reduce the equipment's lifespan and even trigger safety hazards.