Floating Oil Seal Installation and Shutdown

a. Prior to start-up, the sealed cavity should be filled with liquid. When transporting solidified media, steam should be used to heat the sealed cavity to melt the media. The equipment must be rotated before start-up to prevent sudden start-up from causing the soft ring to crack.

b. For mechanical seals using the external sealed oil system of a pump, the DO0340 Coal Mining Machine Floating Oil Seal Company should first start the sealing oil system. Stop the sealing oil system after parking.

c. After the hot oil pump is shut down, the cooling water for the sealed oil chamber and end face seal should not be stopped immediately. It should be allowed to cool until the oil temperature at the end face seal is below 80 degrees before stopping the cooling water to prevent damage to the sealing components.

HowHow to determine the wear condition of a floating oil seal?

Cast iron floating oil seals can automatically compensate for normal wear during use. The sealing face width is between 0.5-1 millimeters. If wear occurs, the contact strip will slightly move inward, and the DO0340 coal mining machine floating oil seal installation pressure will wear out a spherical surface.

During operation, if the floating oil seal wears severely, it can affect the normal operation of the machinery. The DO0340 coal mining machine floating oil seal, therefore, when you notice significant wear, be sure to promptly adjust or replace the DO0340 coal mining machine floating oil seal price to ensure the equipment operates normally.

Maintenance of Floating Oil Seals

Service life is directly related to work efficiency. For floating oil seals, although their quality is good, they are inevitably subject to various wear and damage over time. Therefore, it is crucial to pay more attention to the maintenance of floating oil seals.

We need to clean daily, wash the oil tank and check for any oil leakage. If leakage occurs, it indicates a problem with the oil seal's sealing, and it must be addressed promptly to prevent equipment from malfunctioning. Additionally, inspect all components.

Zhongnuo Sealing Co., Ltd. - DO0340 Mining Machine Floating Oil Seal is provided by Beijing Zhongnuo Sealing Technology Co., Ltd. The DO0340 Mining Machine Floating Oil Seal by Zhongnuo Sealing Co., Ltd. is a new upgrade released by Beijing Zhongnuo Sealing Technology Co., Ltd. this year. The above images are for reference only. Please call the contact number on this page or the image to get in touch with Mr. Dan Xiaopei.