What are the models of floating oil seals available?
This is a material with excellent sealing properties, commonly used in harsh environments for sealing mud, sand, or moisture, essentially a type of mechanical sealing method.
This method is relatively simple in use and the structure is quite straightforward. It is generally used in coal mines these days. Additionally, its stability in operation is very effective, which is why many merchants prefer to use such equipment now.
GNL Floating SealInstallation Instructions
Thoroughly clean the cavity parts, removing all residues, ensuring all edges of the grooves are smooth.
The original packaging of the floating oil seal can only be opened before installation to remove the sealant.
Check the position of the O-ring, DO0850 Excavator Floating Oil Seal; it must not be twisted or deformed. Place half of the sealing element into the cavity entrance and uniformly press it into the cavity. Use anhydrous ethanol to moisten the grooves and rubber rings for easier installation. Absolutely do not use lubricants or greases for assistance in installation.
Check that the outer surface and sealing face of the groove after installation are parallel; a significant deviation is 1MM. The O-ring must have no bumps or protrusions within the groove.
Floating Seal Ring Common Faults and Solutions
Floating seal rings are a crucial component of the floating seal assembly, forming an oil film between the sleeve and shaft, providing sealing. In the process of all floating seal rings, if leakage issues arise due to failures, and the different leakage phenomena vary, the installation pressure of the DO0850 miner's floating oil seal has different causes. The installation clearance of the DO0850 miner's floating oil seal needs to be tailored to different situations and local conditions to formulate solutions.
Common failures and solutions for float seal rings are as follows:
Fault 1: Floating seal ring does not align properly with the sealing component's closed position
Solution: Adjust the limit screws on worm gears or electric actuators, etc., to ensure the valve closes at the correct position.
Fault Two: Foreign Object in Floating Ring Seal Assembly
Solution: Disassemble the floating ring seal assembly, install the DO0850 miner's floating oil seal as shown in the installation video, clean the internal structure of the unit, and remove any foreign objects.
Fault 3: Sealing gas with liquid or pressure difference not meeting the required value
Solution: Inspect the assembly flat and bolt clamping force, ensuring even tightening.
Fault Four: Floating Seal Ring Quality Issue, Aging
Solution: Equip with superior float seals and replace them promptly.
DO0850 Excavator Floating Oil Seal - Provided by Beijing Zhongnu Seal Technology Co., Ltd. Beijing Zhongnu Seal Technology Co., Ltd. adheres to the corporate philosophy of "people-oriented," boasting a team of highly qualified employees. We strive to offer superior products and services to society and warmly welcome both new and old customers to visit and do business with us, sincerely collaborating to create a brighter future together. Beijing Zhongnu Seal - Your Trusted Friend. Company Address: West District of Jinyujichi, Dongcheng District, Beijing. Contact Person: Shan Xiaopei.
