Water excavator equipment is still frequently used in society, so it's important to familiarize yourself with the machine in advance and know how to handle any issues that may arise. As water excavators are heavy machinery, encountering problems during operation, especially when working in wetlands or water, can be quite麻烦. Transportation often requires the use of cranes or similar lifting equipment, which can be time-consuming. When renting a water excavator, how can the driver check if the machine is in good working condition?

Here, let's have a technical staff member from Gu邦 Water Excavator Rental Co., Ltd. explain it to you. After the water excavator is completed with the construction, it is necessary to check whether the amphibious excavator can operate normally before the next project, and the method of inspection is to add a certain amount of fuel material inside the engine. During the use of the amphibious excavator, many people like to reinforce its bucket, but actually, I want to inform you that if the bucket of the amphibious excavator is reinforced with a large-scale welding plate without excessive wear, it will destroy the bucket's own stress mechanics, making the digging resistance, which sometimes can actually accelerate the wear and cracking of the bucket. Therefore, reinforcement should only be done on the bucket if there is significant wear, and not in a blind manner. The amphibious excavator should be driven on as flat a surface as possible, and avoid the upper turntable being placed or rotated automatically; when driving on poor ground, it should avoid rocks damaging the walking motor and track frame. Sand and stones entering the track area can affect the normal movement of the excavator and the lifespan of the tracks; when driving on slopes, ensure the track direction and ground conditions to make the excavator travel as straight as possible; keep the bucket 20-30cm above the ground. If the excavator becomes unstable, immediately lower the bucket; when the engine stalls on a slope, lower the bucket to the ground, place the control lever in the middle position, and then restart the engine.