Specs and Parameters (Customizable as per Customer Requirements)
Key Performance Advantages: Continuous Baking Items
Inner Size: Customized according to customer requirements or product dimensions
Inner Material: Stainless Steel or Cold Rolled Steel Plate
Exterior Material: Cold-rolled steel or stainless steel plate, with surface coating (see optional items for details)
Line Frame: Channel steel square tube or stainless steel frame
Mesh Material: Select Teflon, stainless steel mesh, carbon steel mesh, drum, and chain mesh according to the characteristics of the baking product.
Insulation Material: High-temperature-resistant alumina-silicate wool
Bottom Load-bearing: Square Tubular Channel Steel
Support Foot: Fixed channel steel load-bearing foot or movable swivel casters
Heating Tube Material: Stainless steel, carbon steel, or quartz tube heating tubes, capable of continuous use for 70,000 to 80,000 hours.
Heating Tube Distribution: Evenly distributed along the side air ducts on both sides of the chamber, and the top air duct
Air Distribution: Dual-airway horizontal air supply or dual-airway high-pressure circulation air supply
Blower Motor: High-temperature-resistant motor with longer shaft and multi-blade impeller
Motor Installation: Top, Side, or Bottom
Optional Configurations: See Optional Items
Performance Advantages (Ongoing Improvements)
Blower SystemOptimized airflow design featuring a high-temperature-resistant blower motor with centrifugal blades, providing strong turbo-style air circulation to avoid dead spots. This ensures more even heat distribution within the chamber, leading to greater energy efficiency and quieter operation. It offers an excellent operating environment, with wind speed and pressure meeting testing standards and complying with domestic environmental protection requirements. Some components offer high reliability and compatibility, and are easy to install, maintain, and repair.
Heating SystemEmploying far-infrared heating technology, offering high radiation efficiency and faster heating speeds. The heating tubes are distributed rationally, with the system completely independent, not affecting the control circuit. Temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal box temperature to meet precise electricity demands. This solution is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with solid-state relays, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay accepts the controller's output signal source to control the temperature, allowing for precise, fine adjustments within the PID temperature range for constant temperature operation, thereby enhancing the internal temperature accuracy of the box. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of a malfunctioning instrument or operation error leading to temperature exceeding the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent thermal insulation technology, with significant sealing effects; the exterior of the box maintains the indoor normal temperature, exerting minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short-circuit protection, overload protection, over-temperature protection.
Electrical configuration (available for customization according to customer requirements)
Thermometer controller:A set of intelligent digital temperature controller for automatic temperature control, with temperature accuracy of 0.1-1 degree and PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, with manual/automatic switching, starts timing when the temperature reaches the set value, and cuts off the heating power supply once it reaches the set range.
Time-Alarm DeviceAPT/AD16 Acoustic and Visual Alarm Device, immediate alarm upon completion of set time, manual termination alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use in over-temperature protectors.
Circuit Breaker Activation:Circuit breakers with leakage protection for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output ensures precise temperature control, enhancing the stability and lifespan of the temperature control components and interfaces, and ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire with earth wire properly connected.
Switches and indicator lights:Utilize Chint brand, durable, available to use as per customer request or a specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: available as per customer selection.
Equipment Usage Environment (Please Note)
Installation Site:The ground is level, well-ventilated, with no severe vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for usage and maintenance must be left around the equipment.
Using air pressure:86-106Kpa
Environmental Requirements:Temperature Range: -5 to 40°C, Relative Humidity: ±85%
Power Source:Customers are required to configure a separate air or power switch corresponding to the capacity of this equipment, and properly connect the grounding wire.
After-sales Service (Caring for Customers with Dedication)
Warranty Period:From the date of delivery, our company offers 12 months of full maintenance and warranty for this equipment, with lifetime repair and maintenance services.
Warranty Information:During the warranty period, if quality issues arise, our company will provide free repairs and replacement of certain parts. Outside the warranty period, replacement parts will be charged at the market cost of the components only.
After-Sales ServiceWe received a customer after-sales service call and responded within one hour. In case the customer is unable to resolve the issue themselves, our company will arrive at the customer's site within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime upgrade services for the equipment's software and control system, and free technical support for the hardware components.
