Tunable Pool Agitator QJB2.2/8-320/3-740S

Installation Diagram for Submersible Agitator

Motor 2.2 kW

Cable Grade 8

Flow hood

1.1 Submersible mixer applications

· Submersible mixers are installed in the production wastewater recovery pond of the wastewater recovery system, used for sludge removal from sedimentation basins and filtration pools.

Uniform sedimentation of backwash water and prevention of dead corners.

2.1 Working Conditions

Submersible mixers can operate continuously under the following conditions.

In sludge containing inorganic sand;

The general medium temperature does not exceed 40℃.

The medium's pH value ranges between 5-9.

Liquid density not exceeding 1150 Kg/m³.

Long-term dive operations, with dive depths generally not exceeding 20 meters.

Adjustable pond submersible mixer main components material

Case: Stainless Steel 304

Propeller: Stainless Steel 316

Spindle: Stainless Steel ASTM420

Guides, Pull Chains: Stainless Steel 304

Articulated Hoist Bracket: Stainless Steel 304

Mechanical Seal: Corrosion-resistant sintered tungsten carbide

Bolts, Nuts, Washers: Stainless Steel 316

Flow guide ring: Stainless Steel 304

Adjustable tank submersible mixerFor complete sets of equipment (including self-protective devices), it should be ensured that no additional parts are required during operation, and installation and debugging guidance for the complete set of equipment should be provided. The main supply content should at least include the following parts:

——Fully Assembled Submersible AgitatorMachine main part；

——Matching diving motor

——Stainless Steel Guide Rod (or Cable Guide) (including motor support bracket, top mounting hardware, base)、Bottom fasteners, etc.

——Submersible agitator lifting device

——Extraction cables with oil and waterproof properties, not less than10m(And should be reviewed according to the design drawings);

——Comprehensive set of instruments for leak, overload, and over-temperature alarms, along with necessary signal conversion devices.