TC4Titanium Alloy/Grade 5Titanium Alloy/TA9Titanium alloy plates, titanium alloy rods, introduction to common titanium alloys
Industrial Pure TitaniumTA1、TA2、TA3Excellent stamping performance. Suitable for various forms of welding.Good welding propertiesWelded joints can reach 90% of the base metal's strength.Easily sawn and wheel-cut.Good machining performance. Excellent corrosion resistance; suitable for 350℃The following are parts with low stress and stamped into various complex shapes. Such as: condensers for power plants; seawater corrosion-resistant pipeline systems, valves, and pumps for ships; chemical heat exchangers, pump bodies, distillation towers; seawater desalination systems, platinum-plated anodes; aircraft frames, skins, engine components, beams, etc.
Titanium alloyTA6Excellent welding properties.High creep strength.However, the workability is relatively low.Deforms under heat.Alloys can withstand axial loads.No sensitivity to切口.Good cutting performance - 400℃Parts and welding components for the following work
Titanium alloyTA7Poor stamping performance.Thermoplastic properties are good. Various forms of welding can be performed.Good performance,The weld joint strength and ductility can be equal to the base metal. Machining properties are the same as industrial pure titanium. Good corrosion resistance.Excellent high-temperature thermal stability; suitable for 500 applications℃The following long-term components for work,Available for various die forging parts
Titanium alloyTA8Good thermal plasticity. Suitable for various forms of welding.Good weldability. Machinability similar to industrial pure titanium. Excellent corrosion resistance. 500℃The following are long-term work parts. We can manufacture engine compressor disks and blades.
Titanium alloyTC1Good stamping properties. Suitable for various types of welding.Good weldability. Machinability similar to industrial pure titanium. Excellent corrosion resistance. Suitable for 400 series.℃Parts for the following jobs. Suitable for various sheet materials, stamping, and welding components.
Titanium alloyTC2In 350℃Below,100hThe tensile strength is 400 MPa.Above,Good plasticity in hot processing. Heated to 350-400℃,No tendency to脆.Therefore,Weldable for components operating at high temperatures; 500 pieces available℃Parts, weldments, forgings, and bent components for the following work
Titanium alloyTC4Poor stamping properties.Excellent thermal plasticity. Weldable in various forms.Welded joint strength can reach 90% of the base metal strength.The mechanical processing performance is still good.Required: Carbide tipped cutting tools.High feed rate, slow speed.Fully cooled. Excellent corrosion resistance.Good thermal stability. One of the widely used titanium alloys, suitable for 400 series applications.℃The following components for long-term use
Titanium alloyTC5In 350The following is stable.At higher temperatures, plasticity decreases. Forge and stamping can be performed in the hot state at 350℃Parts for the following work
