Copper-core Cross-linked Polyethylene Insulated Control Cables - KYJV Mining Cross-linked Control Cables, Flame-retardant Cables for Coal Mines, This product we recommend is suitable for control, monitoring, and protective circuits at rated voltages of 450/750V and below. The insulation and sheath control cables are general-purpose and can be produced to meet the requirements of different applications as requested by the customer. This product complies with the GB9330 standard for Plastic Insulated and Sheathed Control Cables, including MKYJV Coal Mine Use Control Cables, MKYJVP Coal Mine Use Shielded Control Cables, and MKYJV22 Coal Mine Use Flame-retardant Control Cables.

Standard: Enterprise Standard Q/TX001-2006 - This standard applies to flame-retardant control cables with copper-core polyethylene sheath for use in coal mines.
Rated Voltage: U0/U is 450/750V.

Conductor core operates at long-term temperatures of 70℃ and 95℃, with cable laying temperature not below 0℃.

Recommended bend radius for cables is as follows:

Unarmored cable, should not be less than 6 times the cable's outer diameter.

Armored or copper tape shielded cables should be no less than 12 times the cable's outer diameter.

Sheathed soft cable, not less than 6 times the diameter of the cable.

Control cables are a general term for power/signal control for equipment and instruments.

Representative Models: KVV/KYJV/and other instrument lines, etc.

Model Product Name Voltage V Number of Wires Cross Section mm2 Main Application Range