Introduction to Liquid Distributor:

The liquid distributor is an extremely critical internal component within the packed tower, affecting not only the mass transfer efficiency of the packing but also its operational flexibility.

To minimize the amplification effect caused by poor liquid distribution and to fully utilize the efficiency of the packing material, it is essential to install a liquid distributor in the packing tower to evenly distribute the liquid over the top of the packing layer. The quality of the initial liquid distribution not only affects the mass transfer efficiency of the packing but also influences its operational flexibility. Therefore, the liquid distributor is a critically important internal component within the packing tower. There are many types of PTFE tube-style liquid distributors with DN500 size and PTFE material. The selection is primarily based on factors such as distribution quality, operational flexibility, processing capacity, gas resistance, and levelness, among others.

PTFE Tubular Liquid Distributor DN500, Material: PTFE, Classification:

1. By fluid dynamics distribution, categorized as gravity type liquid distributors (orifice, weir, pressure type liquid distributors, spray, porous pipe distributors)

2. By the shape of the distributor: Tubular, Double-layer Tubing, Grooved, Disc, Impulse, Nozzle, Pagoda, Lotus, Composite, etc.

3. By the form of liquid leaving the distributor: hole flow type, overflow type.

4. By liquid distribution frequency: Single stage, multi-stage.

5. By combination method of distributors: pipe groove type, hole groove type, groove disk type

DN500 PTFE Tubular Liquid Distributor Features:

Superior liquid distribution performance, suitable for scenarios with numerous spray points and lower liquid loads.

2. The material must be free of solid particles; a filter screen should be installed at the inlet of the vertical pipe.

3. Good operational flexibility of tube-type liquid distributors

4. In high operational flexibility scenarios, a double-row tube liquid distributor can be used.

5. Suitable for large, medium, and small towers

Materials used in pipe distributors include: 304, 316, 316L stainless steel, etc.

Note: We can customize this product according to the customer's requirements!