Desulfurization Tower Stainless Steel perforated plate corrugated packing Y252 metal plate corrugated structured packing is assembled by punching holes in the metal thin plate surface, rolling fine grooves, and then large corrugations. It features low resistance, uniform gas-liquid distribution, high efficiency, high throughput, and insignificant amplification effect, and is applicable for vacuum, atmospheric pressure, and pressurized operations. The processing diameter range of the packing tower is φ150mm to over 12000mm. Metal perforated plate corrugated packing is a type of packing that is uniformly arranged and neatly stacked inside the tower in a regular geometric pattern. It defines the gas-liquid flow paths, improves channeling and wall flow, can have very low pressure drop, and at the same time, provides a larger specific surface area, achieving higher mass and heat transfer effects in the same volume. Due to its uniform, regular, and symmetrical structure, the metal perforated plate corrugated packing has a higher porosity with the same specific surface area as loose packing, resulting in greater throughput and much higher comprehensive treatment capacity compared to plate towers and loose packing towers. Therefore, various general-purpose regular packing types represented by metal perforated plate corrugated packing are widely used in industry.

The use of desulfurization tower stainless steel perforated plate corrugated packing, Y252 metal plate corrugated structured packing, significantly improves the performance of plate towers. Through careful design, manufacturing, installation, and meticulous operation, industrial scale-up effects can be minimized. Due to the advantages of low pressure drop, high flow rate, and high separation efficiency, regular packing is widely used in many tower units in fields such as fine chemicals, fragrance industry, refining, and petrochemicals.

Product Main Structure and Features: The Y252 metal plate corrugated structured packing is characterized by directly stamping and stretching stainless steel metal plates into smaller-sized diamond-shaped mesh plates, which are then stamped into corrugated sheets to form packing disks. It combines the performance advantages of metal wire mesh corrugated packing and metal plate corrugated packing, making it a new type of packing that offers both high efficiency and low cost. Due to its larger specific surface area, it has higher efficiency. The regular diamond mesh is easily covered with a liquid film, and the uneven surface strengthens liquid film turbulence, mixing, and surface renewal.

Jiangxi Dier Chemical Filler Co., Ltd. in Pingxiang City, Jiangxi Province was established in 2004. It is a key enterprise under the former Ministry of Chemical Industry for producing chemical fillers and a member of the National Chemical (Technology, Intelligence) Center Station Board of Directors, as well as a member of the China Petroleum and Chemical Survey and Design Association. The company has established long-term cooperative relationships with major enterprises such as China Petroleum, Sinopec, CNOOC, Sinochem Group, COFCO Group, Shenhua Group,延长石油, China National Nuclear Corporation, China Aviation Industry Group, Henan Energy, Shaanxi Coal Chemical Group, and more. Covering an area of 25,000 square meters, the company has a registered capital of 98 million yuan, fixed assets of 50 million yuan, and a staff of over 300, including 48 senior and intermediate technical professionals. The company produces 18 series and over 100 types of products, including metal, ceramic, plastic fillers, tower internals, and chemical equipment, with annual sales exceeding 400 million yuan. Especially in recent years, the company has continuously expanded its business in environmental protection tower internals and the new energy field. More than a thousand sets of environmental protection tower internals designed and produced by our company have been installed. The company has established a one-stop long-term cooperative relationship with over a hundred central enterprises, listed companies, and environmental protection companies in China for the design, production, and installation of tower internals and environmental protection fillers. The company regularly employs three experts with doctoral degrees in tower design from Tsinghua University, Tianjin University, and East China University of Science and Technology. It has established school-enterprise cooperative relationships with Tianjin University, East China University of Science and Technology, and Hebei University of Technology. In addition, it has established a joint laboratory and R&D center with Zhejiang University of Technology through in-depth cooperation, established domestic testing facilities, and provided a strong technical support for the company's product quality, tower internals design, production, and new product development.