Application:
The equipment is suitable forFine chemical products, especially materials with high viscosity and solid content.Such as detergents, salads, soy sauce, etc.
Structural member:
This 5L vacuum emulsifying mixer includes an emulsion tank (with a wavy lid and a tilting kettle), a kettle, an oil壶, vacuum system, heating and temperature control system, cooling system, and motor control system.
Principle:
First, place the water-soluble ingredients in a pot of water, then heat and mix.
2: Heat and mix the oil-soluble ingredients in the oil pot, then transfer both ingredients into the main pot and homogenize them with a homogenizer.
Features:
The lid is an automatic lifting type.Based on pipes in a vacuum state, materials are directly drawn from oil boilers and water boilers into the emulsion boiler.Emission based on rotating emulsion boiler.The heating system is electrically and steam-heated by heating pipes, with automatic temperature control.Place cold water in the slat bed to cool the material, simple and convenient (with a warm layer outside the slat bed).Homogenizers and blade agitators can work together or operate separately.Materials can be slid, emulsified, mixed, and dispersed in a short period of time.Contact points are made of stainless steel (316L material, polished inner surface, vacuum mixing equipment hygienic,
Technical Specifications:
| Name | ZJR-5 | ZJR-10 | |
| Emulsifying Pot | Design Volume (L) | 6 | 10 |
| Capacity (L) | Five | 8 | |
| Screw mixer power (KW) | 0.55 | 0.55 | |
| Screw mixing speed (rpm) | 0-86 | 0-86 | |
| Homogenizer Power (KW) | 1.1 | 1.1 | |
| Electric Heating Power (KW) | 2 | 2 | |
| Homogenizer Speed (rpm) | 3500 | 3500 | |
| Water bottle | Design Volume (L) | 3.35 | 7.8 |
| Capacity (L) | 2.7 | 6 | |
| Power (KW) | 0.025 | 0.025 | |
| Speed (rpm) | 1200 | 1200 | |
| Electric Heating Power (KW) | 1 | 1 | |
| Oil壶 | Design Volume (L) | 3.35 | 7.8 |
| Capacity (L) | 2.7 | 6 | |
| Power (KW) | 0.025 | 0.025 | |
| Speed (rpm) | 1200 | 1200 | |
| Electric Heating Power (KW) | 1 | 1 | |
| Dimensions | Length, width, height | 800mm x 550mm x 1430mm | |
Order Requirements:
What methods do you use to heat machines with steam or electricity?
Do you need automatic, manual, or semi-automatic?
Do you need water and oil pans?
What are your raw materials?
What is voltage?Is it 380V 50Hz 3-phase?
When are you planning to purchase this machine?
