Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, we have been committed to the research and development of intelligent electric gate technology and providing comprehensive access control solutions. Our main products include retractable gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, barrier gates, and smart home IoT devices. We achieve intelligent IoT management that is both visible and controllable for our products. Over the years, the company has adhered to the principle of "people-oriented and technology-assisted." At the same time, we continuously introduce international management experience, achieving product technological advancement and humanization.
The residential gate system is a specialized access control device for restricting motor vehicle traffic on roads, now widely used at highway toll booths, parking lots, residential complexes, and corporate entrances for vehicle in and out management. Electric gates can be individually operated by remote control for lifting and lowering the barrier, or can be activated passively through a parking management system (i.e., an IC card access system). Depending on the application of the gate, the barrier can be straight, 90-degree curved, 180-degree bent, or grille-style.
When a vehicle passes through the ground induction loop, an inductive signal is transmitted to the vehicle detector. The vehicle detector then announces two relay signals: one for entering the ground induction loop and one for leaving, each with normally open and normally closed signals. Additionally, the boom gate usually has a ground induction infrared input interface. Normally, the vehicle detection signal is connected to the ground induction infrared interface. When a vehicle approaches, the boom gate is lifted upon card swipe; it lowers automatically as the vehicle passes. The vehicle detection loop will not raise the boom gate if the vehicle approaches it. However, if the supplier's product lacks a ground induction infrared interface, or if the interface is damaged, or if the new vehicle detector and the ground induction infrared interface are not compatible, they connect the vehicle detector's two signals to the boom gate's lift and lower ports. This ensures the boom gate lowers automatically as the vehicle passes and prevents it from lowering when the vehicle is stationary, maintaining vehicle safety. The only drawback is that the boom gate may open if the vehicle is pressed against the ground induction loop. Another scenario is an issue with the boom gate control board or the card swipe main board, which can be determined by examining how the现场 lines are connected.
1. This unit features full wireless control, ensuring both safety and convenience. Simply plug into a 220V power source and ground the housing, and it's ready for operation, eliminating the need for complex wiring and cabling work.
2. Features a special balanced organization design, aluminum wavebox integrated structure, for slow start, quick movement, and slow stop of the gate rod, resulting in low noise, fast heat dissipation, smooth and durable operation, and no inertia!
3. The barrier gate features multiple interfaces, allowing you to connect accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beam cut-offs. It not only meets safety requirements for the gate but can also be integrated into a toll collection system for active processing.
