Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, the company has focused on the R&D of intelligent electric gate technology and comprehensive access management solutions. Our main products include retractable gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, gate barriers, and smart home IoT devices. We achieve intelligent IoT management with visible and controllable product capabilities. Over the years, the company has adhered to the philosophy of "people-oriented, technology-assisted." At the same time, the company continuously introduces overseas management experience, achieving product technologization and humanization.

The residential gate system is a specialized equipment for managing the entry and exit of vehicle traffic on roads, now widely used at highway toll stations, parking lots, residential complexes, and corporate entrances for vehicle management. Electric gates can be operated independently via remote control to raise and lower the barrier, or they can be activated passively through the parking management system (i.e., IC card payment system). Depending on the application, the gate rods can be straight, 90-degree curved, 180-degree bent, or grille-style.

When a vehicle passes over the ground induction loop, an inductive signal is transmitted to the vehicle detector. The vehicle detector then announces two relay signals: one for the entry into the ground induction loop and another for the exit. Each group consists of both normally open and normally closed signals. Additionally, the barrier gate typically has a ground induction infrared input interface. Normally, the vehicle detection signal is connected to the ground induction infrared interface. The barrier gate opens when a vehicle approaches and a card is swiped, and it closes automatically when the vehicle passes. However, if the supplier's product lacks a ground induction infrared interface, or if the interface is damaged, or if the new vehicle detector and the ground induction infrared interface are not compatible, they connect the vehicle detector's two signals to the barrier gate's open and close ports. This still ensures the barrier gate closes automatically when the vehicle passes and prevents the gate from lifting when a vehicle touches the ground induction loop. The only drawback is that the barrier gate may open if the vehicle is pressed against the ground induction barrier. Another scenario is that there is an issue with the barrier gate control board or the card swipe main board, which can be determined by examining how the现场 lines are connected.

1. The machine features full wireless control, offering both safety and convenience. Simply plug it into a 220V power source and connect the housing to ground, and it's ready for operation, eliminating the need for complex wiring and cabling work.

2. Features special balanced organization design, aluminum wave box integrated, enabling slow start of the gate rod, quick movement, and slow stop. This results in low noise, fast heat dissipation, stable and durable operation, and no inertia!

3. This gate barrier offers multiple interfaces, allowing for connection to accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beams. Not only does it meet the safety requirements for gate barriers, but it can also be integrated into a toll system for active transaction processing.