Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, we have focused on the research and development of intelligent electric gate technology and comprehensive solutions for entrance and exit management. Our main products include: telescopic gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, access gates, and smart home IoT devices. We achieve visible, controllable, and intelligent IoT management of products. Over the years, the company has adhered to the philosophy of "people-oriented and technology-assisted." At the same time, we continuously introduce foreign management experience, realizing product technologization and humanization.
The residential gate system is a specialized equipment for managing vehicle entry and exit at roadways, commonly used at highway toll booths, parking lots, residential complexes, and corporate entrances. It facilitates vehicle access control. Electric gates can be remotely operated to raise and lower the barrier, and can also be integrated with parking management systems (such as IC card systems) for automatic operation. Depending on the application, the gates can be straight, 90-degree curved, 180-degree bent, or gate-style barriers.
When a vehicle passes through the ground induction loop, an inductive transmission is sent to the vehicle detector. The vehicle detector then announces two relay signals: one for the entry into the ground induction loop and one for the exit, each with both normally open and normally closed signals. Additionally, the barrier gate usually has a ground induction infrared input interface. Normally, the vehicle detection signal is connected to the ground induction infrared interface. The barrier gate opens when a vehicle approaches and刷卡, closes automatically when the vehicle passes, and will not open automatically if the vehicle touches the ground induction loop. However, if the supplier's product lacks a ground induction infrared interface, or if the interface is damaged, or if the new vehicle detector and ground induction infrared interface are not compatible, they connect the two signals of the vehicle detector to the barrier gate's open and close ports. This still ensures the barrier gate closes automatically when the vehicle passes and prevents the gate from lowering when the vehicle is present, although the drawback is that the gate may open if the vehicle presses on the ground induction barrier. Another scenario is an issue with the barrier gate control board or the card swipe main board, which can be determined by examining how the现场 lines are connected.
1. This machine features full wireless control, offering both safety and convenience. Simply connect it to a 220V power source and ground the housing, and it's ready to operate, eliminating the need for complex wiring and cabling work.
2. Features a special balanced organization design, with an aluminum wave gear case integrated, enabling slow start, quick movement, and slow stop of the gate rod. This results in the entire unit being low-noise, quick in heat dissipation, stable and durable operation, and free of inertia!
3. This gate barrier features multiple interfaces, allowing you to connect accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beams. Not only does it meet safety requirements for the gate barrier, but it can also be integrated into a toll collection system for active processing.
