Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, we have been dedicated to the research and development of intelligent electric gate technology and comprehensive solutions for entrance and exit management. Our main products include: telescopic gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, passage gates, and smart home IoT devices. We achieve visible and controllable intelligent IoT management of products. Over the years, the company has adhered to the principle of "people-oriented, technology-assisted." At the same time, we continuously introduce foreign advanced management experiences, achieving product technology and humanization.
The residential gate system is a specialized equipment for managing the entry and exit of vehicle traffic on roads. It is now widely used at highway toll gates, parking lots, residential communities, and corporate entrances for vehicle access control. Electric gates can be operated independently via remote control to raise and lower the barriers, or they can be activated passively through the parking management system (i.e., IC card access system). Depending on the application, the gate arms can be straight, 90-degree curved, 180-degree bent, or grille-style.
When a vehicle passes through the ground induction loop, an inductive signal is transmitted to the vehicle detector. The vehicle detector then triggers two relay signals: one for the entry into the ground induction loop and another for the exit. Each set includes both normally open and normally closed signals. Additionally, the barrier gate usually has a ground induction infrared input interface. Normally, the vehicle detection signal is connected to the ground induction infrared interface. The barrier gate opens when a vehicle approaches and刷卡, closes automatically when the vehicle passes, and will not open automatically if the vehicle touches the ground induction loop. However, if the supplier's product lacks a ground induction infrared interface, or if the interface is damaged, or if the new vehicle detector and the ground induction infrared interface are not compatible, they connect the two sets of signals from the vehicle detector to the barrier gate's open and close ports. This still ensures the barrier gate closes automatically when the vehicle passes and prevents it from closing when the vehicle is parked. The only drawback is that the barrier gate may open if the vehicle is pressed against the ground induction loop. Another situation is that there may be an issue with the barrier gate control board or the card reader main board, which can be determined by how the现场 lines are connected.
1. The machine is equipped with full wireless control, offering both safety and convenience. Simply connect it to a 220V power source and ensure the housing is grounded, and it's ready to operate, preventing the hassle of complex wiring and cabling tasks.
2. Features a special balanced organization design, with an aluminum wavebox integrated, allowing for slow start of the gate rod, quick movement, and slow stop. This results in the whole machine core being low-noise, fast heat dissipation, stable and durable operation, and free from inertia!
3. The barrier gate features multiple interfaces, allowing for the connection of accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beam break sensors. Not only does it meet the safety requirements of the barrier gate, but it can also be integrated into a toll system for active processing.
