Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, the company has focused on the research and development of intelligent electric gate technology and comprehensive solutions for entrance and exit management. Our main products include retractable gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, gate barriers, and smart home IoT devices. We achieve visible, controllable, and intelligent IoT management of products. Over the years, the company has adhered to the principle of "people-oriented, technology-assisted." At the same time, the company continuously introduces foreign management experience, achieving product technology and humanization.
The residential gate system is a specialized equipment for handling vehicle entry and exit at road access points, designed to restrict motor vehicle traffic. It is now widely used at highway toll stations, parking lots, residential communities, and corporate entrances for vehicle management. Electric gates can be operated independently via remote control to raise or lower the barrier, or can be activated passively through the parking management system (i.e., IC card access system). Depending on the application, the gate arms can be straight, 90-degree curved, 180-degree folding, or grille-style.
When a vehicle passes through the ground induction loop, an inductive signal is transmitted to the vehicle detector. The vehicle detector then announces two relay signals: one for the entry into the ground induction loop and another for the exit. Each set consists of both normally open and normally closed signals. Additionally, the barrier gate typically has a ground induction infrared input interface. Normally, the vehicle detection signal is connected to the ground induction infrared interface. The barrier gate is opened when a vehicle approaches and the barrier gate is lowered when the vehicle passes. However, if the supplier's product lacks a ground induction infrared interface, or if the interface is damaged, or if the new vehicle detector and the ground induction infrared interface are not compatible, they connect the two sets of signals from the vehicle detector to the barrier gate's opening and closing ports. This ensures the barrier gate is lowered automatically when the vehicle passes and prevents the barrier gate from being raised when the vehicle touches the ground induction loop. The only drawback is that the barrier gate may open if the vehicle is pressed against the ground induction loop. In another scenario, if there is an issue with the barrier gate control board or the card reading mainboard, the problem can be identified by examining how the现场 lines are connected.
1. This unit features full wireless control, offering both safety and convenience. Simply plug it into a 220V power source and ensure the housing is properly grounded, and it's ready for operation, eliminating the need for complex wiring and cabling work.
2. Engineered with a special balanced organization design, the aluminum wavebox is integrated, enabling slow start, fast movement, and slow stop of the gate rod. This feature ensures the whole machine core operates with low noise, rapid heat dissipation, smooth operation, durability, and no inertia!
3. The gate has multiple interfaces, allowing you to connect accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beams. It not only meets safety requirements for the gate but can also be integrated with a toll collection system for active processing.
