Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, it has focused on the R&D of intelligent electric gate technology and comprehensive access management solutions. Its main products include retractable gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, passage barriers, and smart home IoT devices. It achieves intelligent IoT management of products with visibility and controllability. Over the years, the company has adhered to the philosophy of "people-oriented, technology-assisted." At the same time, the company continuously introduces foreign *** management experience, realizing product technology and humanization.
The residential gate system is a specialized equipment for handling the entry and exit of motor vehicles on roads, now widely used at highway toll gates, parking lots, residential communities, and corporate entrances for vehicle management. Electric gates can be operated independently via remote control to lift or lower the barrier, or they can be managed actively through a parking system (i.e., an IC card access system). Depending on the application, the gates can be straight, 90-degree curved, 180-degree folding, or grille gates.
When a vehicle passes over the ground-loop sensor, an inductive signal is transmitted to the vehicle detector. The vehicle detector then announces two relay signals: one for entering the ground-loop sensor and another for exiting, with each set consisting of normally open and normally closed signals. Additionally, the gate typically has a ground-loop infrared input interface. Under normal circumstances, the vehicle detection signal is connected to the ground-loop infrared interface, and the gate opens when a vehicle approaches and刷卡, closes automatically when the vehicle passes, and will not open automatically if the vehicle touches the ground-loop sensor. However, if the supplier's product lacks a ground-loop infrared interface, or if the interface is damaged, or if the new vehicle detector and ground-loop infrared interface are not compatible, they connect the vehicle detector's two sets of signals to the gate's open and close ports. This still ensures the gate closes automatically when the vehicle passes and prevents it from closing when the vehicle is there, but the drawback is that the gate will open if the vehicle is pressed against the ground-loop gate. Another scenario is when there is an issue with the gate control board or the card reader main board, primarily determined by how the现场 lines are connected.
1. This unit features full wireless control, ensuring both safety and convenience. Simply connect to a 220V power source and ground the housing, and you're ready to operate, avoiding the complexities of wiring and cabling.
2. Engineered with a special balanced organization design, the aluminum wave box is integrated, allowing for slow start-up, rapid movement, and slow stopping. This results in low noise, fast heat dissipation, smooth and durable operation, and features such as no inertia!
3. The gate features multiple interfaces, allowing you to connect accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beams. Not only does it meet safety requirements for the gate, but it can also be integrated with a toll system for active processing.
