Infrared High-Temperature Infrared Radiation Paint Usage Instructions
Xuchang Infrared Institute has successively undertaken national, provincial, and municipal projects over the years.
Over 40 advanced research projects, with more than ten awards at various levels
Research achievements. Among them, the infrared non-ferrous metal melting technology.
Art, infrared ceramic tunnel kiln, direct-heat infrared radiation
Infrared radiation coatings, such as sheets, and high-temperature infrared coatings, etc. Infrared skin
Hair dryer, infrared static flocking drying system
Mobile and Transferable Felting Machine Wins Henan Province Science and Technology Achievement Award
Second Prize, Provincial and Municipal High-tech Products, National Real
Utilizing new patents and invention patents. Additionally“Solar Energy
Central Heating Project” 、“Infrared Radiation Pipe Heating Equipment
Place”、“Rapid Infrared Radiation Heater”All obtained
Second Prize in Municipal Science and Technology Achievements. Infrared self-control variable temperature furnace,
Direct-heat infrared componentsXWGTModel High-Temperature Red
External radiation coating88Yearly Recommended for Energy Conservation in Henan Province
Project, Third Prize of Xin'an City Science and Technology Progress.2002Year
We have developed a nano low-temperature infrared radiation coating.
Material.
XWGTHigh-temperature infrared radiation paint, odorless
Harmless to humans, non-polluting, long shelf life, good adhesion, easy to install, and simple to operate. Its main performance characteristics are as follows:
Fusibility temperature:1350℃
Hemispherical Reflectivity:≥0.88
Shelf Life:18Over a month
1Pre-treatment for furnace and kiln coating
Old kilns: Remove the refractory lining material from the surface
Nodules, float layers, etc., on the refractory surfacejDry
Dry, lightly mist with water before brushing for slight moistening.
Can be brushed or sprayed.
2New kiln: In principle, the surface of the refractory lining material is
Direct spray painting, if conditions permit, new construction
Furnaces can also be parked.2－3After the goddess, wait for the moisture to evaporate.
Apply paint (spray) after shipment.
2Spraying:
Before use, mix the adhesive and powder materials by weight.
Quantity Ratio6：4Thoroughly mix and restore to the original gel consistency.
Body condition, apply the paint immediately after mixing.
2>Transfer the paint to the spray equipment container, add
After mixing with an appropriate amount of water, apply evenly. The coating thickness is generally
No more than1.0mmFirebrick and refractory concrete
Apply a slightly thicker coating, depending on the furnace material and usage time.
The differences are in the coating per square meter.0.5－2kgFor
Yee.
3Brush coating:
1>Brush coating is suitable for smaller furnaces and furnace wall geometries.
Complexly shaped furnace.
2>On the surface of the furnace refractory material, using a brush from above
Paint from bottom to top, left to right, and on both sides and up.
Apply several coats, then allow to dry naturally or
4Drying and hardening of the coating:
Coating dries within half a day under dry weather conditions.
Heat, naturally dry when conditions permit2-3Day, or
Low Temperature150-200℃Bake down2-3Hour, Coating
The construction will become more robust. Then, the furnace can be heated according to the normal升温 curve.
The line is being heated.
Color Type
Black, Olive Green, Rust Red
Black, Dark Green, Rust Red
Black, Iron Red
Black, Ferric Red
Charcoal grey
Note:1All the infrared radiation paint fillers listed above utilize zirconium ceramic powder.
2Coatings, total quantity >50kgAt that time, other colors can be customized.
