IBC Tote Manufacturer with Iron Frame

IBCTon barrel inner lining is made of ultra-high molecular weight high-density polyethylene (HWHDPEOne-time blow molding, utilizing axial and radial wall thickness control to ensure the inner wall of the container is relatively even in thickness at symmetrical locations, in ultra-high molecular weight high-density polyethylene (HWHDPEThe raw material includes UV inhibitors to prevent the aging of the container's interior. The container side features liquid level graduation lines for easy filling. The discharge valve is made of high-density polyethylene.HDPE) and polypropylene (PP)PPManufactured, connected to the inner lining of the container with a screw thread, using ethylene propylene diene terpolymer (EPDM).EPDMFluororubber(FPM)To accommodate corrosion resistance for various liquid products, the valve handle is equipped with a locking screw to prevent accidental opening.,Valves for export are fitted with an internal cover and a sealing ring, and are secured externally with a threaded cap, serving as a secondary seal for the valve to prevent leakage. The inner lining of the container is at the top, with a diameter153MMThe filling port, made of EPDM (Ethylene Propylene Diene Monomer).EPDMOr fluoro rubberFPMSeal rings for sealing. The filling port cover is equipped with a sampling cover inner lid and a theft-proof cover for convenient sampling. The filling port cover and the sampling cover inner lid are made of三元乙丙（SBR）。EPDMOR fluororubberFPMSeal rings are used for sealing. Anti-theft lids utilize one-time, tear-off pressure seal anti-theft lids. A pressure relief valve is installed within the lid to release gases emitted from liquid products or pressure changes due to thermal expansion and contraction, which cause changes in the air volume at the top of the container's inner lining. The pressure relief valve features a breathable membrane that allows air passage while blocking liquids. It is sealed tightly with a conical fit within the sampling lid. The content container cannot withstand internal pressure. Material selection for all parts considers hygiene and resistance to corrosion from acidic, alkaline, and oily liquids.