Honeycomb activated carbon environmental protection equipment features low energy consumption, reducing both cost and operational expenses. The purified gas fully complies with environmental protection standards. Detailed content and performance parameters of honeycomb activated carbon: divided into water-resistant and non-water-resistant types, with identical indicators, and specifications can be produced according to customer requirements. Honeycomb activated carbon boasts large surface area, high adsorption capacity, and high surface activity, and is widely used in air pollution control.

Honeycomb activated carbon employs the honeycomb activated carbon adsorption method, where waste gas comes into contact with a large surface area of porous activated carbon, absorbing and decomposing pollutants in the waste gas. The moving shell activated carbon serves as a purification agent. The pollutants that honeycomb activated carbon can remove to varying degrees include ethanol, acetic acid, phosgene, and malodorous gases. Soaking honeycomb activated carbon in chemical reagents can remove acid mist, sulfur dichloride, and more.

The appropriate method for using honeycomb activated carbon to control atmospheric pollution is to utilize honeycomb activated carbon. Comprised of two adsorbents in parallel, it is suitable for treating intermittent waste gases. It can be used for continuous exhaust, for adsorption, and for desorption and regeneration. High temperatures will reduce the adsorption capacity and effectiveness, so it is advisable to avoid excessive dust content in the gas, as it can block the pores of the activated carbon and diminish the adsorption efficiency.

It is necessary to install a filter in front of the honeycomb activated carbon to extend its service life. Technical parameters of the main components of honeycomb activated carbon: normal compressive strength of activated carbon is greater than 0.8MPa, commonly used specifications are 100*100*100mm, and operating temperature is less than 400°C.

Honeycomb activated carbon with a 150 pores/square inch rating, air velocity in the empty tower at 0.8 m/s, product surface smooth with no cracks. Note: Carbon products of other specifications can be produced according to customer requirements. Features: Widely used in various low-concentration organic waste gas purification systems with high air volume, these systems include but are not limited to. Honeycomb activated carbon has strong adsorption capabilities, with an adsorption efficiency as high as 16% and efficient desorption.

Honeycomb activated carbon powder is widely used in the purification of various gases, including toluene, xylene, benzene, phenols, fats, malodorous gases, and trace metals, etc. Activated carbon environmental protection equipment has low energy consumption, which can reduce costs and operational expenses.

Honeycomb activated carbon purification gas fully meets environmental emission requirements. Applications of honeycomb activated carbon: industrial exhaust gas treatment, and air treatment in public places like large theaters.

Selected high adsorption coal and coconut shell powder as raw materials, combined with our unique adhesive formula, through kneading, blending, filtering, extrusion, shaping, drying (sintering), it boasts high compressive strength, rapid adsorption speed, short desorption time, high adsorption capacity, large specific surface area, and well-developed pore structure.