The hydraulic open-box sand making machine is widely used for crushing metal and non-metallic minerals, building decoration materials, artificial sand, and various metallurgical industry fly ash. Our hydraulic open-box sand making machines are suitable for brittle raw materials with hardness below grade 9 and are not suitable for sticky materials or sand and gravel with high soil content. The hydraulic open-box sand making machine can be used for crushing cobblestones and river cobblestones. Currently, natural sand and river sand resources are scarce, and artificial sand and artificial cobblestone sand have become substitutes for natural sand, stepping onto the historical stage! Sand is also a basic material for many industries, and its price has increased several times compared to the previous one, which explains why the hydraulic open-box sand making machine is so popular.
Operating Principle
The hydraulic opening sand making machine is an improvement over the "river pebble sand making machine." Traditional sand making machines lack a hydraulic assist system, requiring two or three workers to spend one to two hours removing the rear cover. The introduction of the hydraulic sand making machine addresses this issue. One-button opening not only facilitates the replacement of hammers, side plates, and top plates but also more quickly resolves material blockage problems! The entire process takes only 5 minutes, saving approximately 3-4 hours of cover exchange time compared to traditional equipment, saving time and effort. Worried about material blockage? After 5 minutes of opening, the blocked material can be directly addressed, with the entire process taking only 10 minutes. The hydraulic opening sand making machine is a device mainly used for producing building sand and gravel from river pebbles. Due to the uniform particle size and good particle shape of the sand produced by the hydraulic opening sand making machine, as well as its high compressive strength, it meets the requirements of high-standard building sand more than natural sand or hammer crusher-produced sand, playing an irreplaceable role in various fine crushing equipment for ores.
Material Range
Product Specifications
Model and Specifications | Large raw material (mm) | Power （kw） | Impeller Speed （r/min） | Processing Volume （t/h） | Dimensions （mm） |
|---|---|---|---|---|---|
PCX-600 | 35 | 22～55 | 2000～3000 | 12～30 （-0.8mm30%） （-0.8mm60～90%） | 2500×1600×2260 |
PCX-850 | 50 | 90～180 | 1200～2000 | 55～100（-0.8mm30%） （-0.8mm60～90%） | 3900×2160×2770 |
PCX-1050 | 55 | 150～264 | 1000～1700 | 100～160（-0.8mm30%） （-0.8mm60～90%） | 4660×2450×3660 |
PCX-1280 | 60 | 264～440 | 850～1450 | 160～300（-0.8mm30%） （-0.8mm60～90%） | 5600×2950×4000 |
PCX-1400 | 80 | 400～500 | 800～1193 | 200～400（-0.8mm30%） （-0.8mm60～90%） | 5340×2940×3650 |
