GFLSeries of steel structure lightning rod towers, as per15D501Standard atlas for processing, suitable for wind pressure0.4KN/Square meters and wind pressure0.7KN/Square meter areas are typically installed on ground reinforced concrete bases, with a common height range20—40Rice, available in custom heights as per actual requirements.GFLSeries steel structure lightning rod towers are widely used in lightning protection projects for various buildings, such as warehouses, workshops, power stations, and oil refineries.,Gas Station,Chemical Factory,Coal Mine,Explosives storage facility,Flammable and explosive workshops, station yards, storage factory areas, etc.
GFLSeries steel structural lightning rod towers are manufactured using angle steel sections, while the lightning rod ends are made of steel pipes. After the welding of the lightning rods and their ends, the entire assembly should be subjected to hot-dip galvanizing treatment. The lightning ends of the lightning rod ends are preferably made of:DN25Steel pipes are shaped into a point, with the tip length being70mm。
GFL series steel structure lightning rod towers, manufactured according to the 15D501 standard design, are suitable for areas with wind pressures of 0.4 KN/square meter and 0.7 KN/square meter. Generally installed on reinforced concrete foundations, they are commonly available in heights ranging from 20 to 40 meters, and can be customized to meet specific height requirements. The GFL series steel structure lightning rod towers are widely used in lightning protection projects for various buildings, including warehouses, workshops, substations, refineries, gas stations, chemical plants, coal mines, explosives storage, flammable and explosive workshops, train station cargo yards, and storage areas.
The GFL series lightning rod tower is made of angle steel sections. The lightning rod end is made of steel pipe. After the welding of the lightning rod and the end rod, the entire structure should be hot-dipped galvanized. The lightning rod end should be made into a pointed shape with a DN25 steel pipe, with a cone tip length of 70mm.
