To achieve better fuel efficiency with the rented generator, improvements are needed in diesel engine coolant temperature, maintaining the fuel injection angle, and ensuring the mechanical seals do not leak. Below is the continuation.Shandong Generator RentalLet's take a specific look at how to save fuel with rented generators and what fuel-saving methods are available!
How to Better Save Fuel for a Rented Generator
Enhance the temperature of the diesel engine coolant
Improved water temperature allows for better diesel combustion, reducing oil viscosity, cutting down on friction, and achieving fuel-saving results.
2. Maintain oil angle supply
If the fuel angle is offset, it will result in late fuel injection, leading to a significant increase in fuel consumption.
3. Guaranteed no oil leakage in packaging machinery
Diesel fuel lines often suffer from misaligned joint surfaces, deformed or damaged gaskets, or leaks. The solution is to coat the gasket with valve paint, flatten it on a glass plate, and align the fuel line joint. Additional diesel intake manifold installation can be added, using a plastic tube to connect the return line from the nozzle to a hollow screw, allowing the return oil to flow into the fuel tank.
4. Oil materials for progressive purification
More than half of the issues with diesel engines stem from the fuel supply system. The solution is to let the purchased diesel settle for 2-4 days before use, which can remove 98% of impurities. If using immediately, place two layers of silk fabric or tissue paper over the oil tank's fuel filter.
5. Major changes in "Big Horse Pulling a Small Cart"
Increase the diameter of the diesel engine belt pulley to increase the pump speed during the engine's reduced-speed operation, thereby enhancing flow rate and head, achieving energy-saving objectives.
Ways to save fuel for generators
1. Regularly inspect and maintain diesel generators
Thoroughly nurture and maintain by regularly inspecting and adjusting valve clearances, fuel injection pressure, and fuel delivery timing, and promptly removing scale and debris from the coolant jacket.
2. Regularly flush out the mineral deposits or impurities that settle at the bottom of the diesel generator's fuel tank after use.
If not regularly cleared, it will affect the normal operation of the plunger and nozzle, leading to phenomena such as inaccurate fuel injection timing, uneven fuel supply, and poor fuel atomization, which in turn increases fuel consumption.
3. Maintain a consistent water temperature during use
The cooling water temperature of the diesel generator should be maintained around 45-65 degrees. If the water temperature is too low, it can cause incomplete combustion of diesel, increasing the machine's load. It is not advisable to use wastewater, muddy water, or rainwater for the cooling water.
Do not overwork diesel generators.
Overworking leads to a significant portion of diesel being emitted as black smoke, failing to perform its intended efficiency, increasing fuel consumption, and simultaneously shortening the lifespan of relevant components.
5. Timely cleaning of diesel generator carbon deposits
During the shutdown of a diesel generator, certain components generate high temperatures, causing ash and polymer deposits to adhere to the valves, valve seats, fuel injectors, and piston tops. Failure to clean these deposits promptly will increase fuel consumption and severely affect the generator's normal operation.
