The ZH07-H liquid-cooled high-speed torque sensor has been redesigned for appearance, allowing direct connection of coolant or lubricating oil. It effectively reduces temperatures generated under high-speed operation over extended periods, enhancing heat dissipation and reliability, ensuring high-precision measurement. The external structure is tightly sealed, and the internal signal transmission is contactless. It can also measure the rotation angle. With the aid of coolant, the rotational speed can exceed 15,000 RPM, making it suitable for torque measurement of high-speed power sources.
ZH07-H High-Speed Liquid-Cooled Torque Sensor Technical Specifications
Range: 10~30 KN.m
RPM: 15,000 RPM
Sensor supply voltage: ±12C (optional 24VDC)
Torque Accuracy: 0.2% F.S., 0.3% F.S., 0.5% F.S.
Repetition: 0.2% F.S., 0.3% F.S., 0.5% F.S.
Linearity: 0.2% F.S., 0.3% F.S., 0.5% F.S.
0.2% F.S., 0.3% F.S., 0.5% F.S.
Overload Capacity: ≤150%
Insulation Resistance:>200 MΩ
Operating Temperature Range: -20℃ to +60℃
Relative Humidity: ＜90%RH
Sensor Power Consumption: <4W
Load Current < 15mA
Sensor signal output is adjusted and can be directly fed into the PLC for collection.
ZH07-H High-Speed Liquid-Cooled Torque Sensor Output Signal
Torque Standard Output Signal
Frequency Signal Output: 5KHz to 15KHz, zero point at 10KHz, amplitude of 5V
Zero-torque frequency output: 10 KHz
Positive torque full-scale frequency output: 15KHz
Reverse torque full-scale frequency output: 5 KHz
Standard rotational speed output signal
Frequency Signal Output: Amplitude 5V
The number of pulses depends on the tooth count of the sensor's speed disc or the grating count of the encoder, with the output pulse count per revolution ranging from 60 to 3600 pulses/revolution (available in A, B phases, with a phase difference of 90°).
ZH07-H Liquid-Cooled High-Speed Torque Sensor, Other Signal Options
The sensor output signal amplitude can be increased to 24V (NPN, PNP options available).
Convert the frequency signal from the sensor to F/V, F/I (optional analog voltage, current)
Serial Bus Type: RS232/485 Optional
ZH07-H Liquid-Cooled High-Speed Torque Sensor Output Signal Reading Method
ZH07-H Liquid-Cooled High-Speed Torque Sensor Product Features
External coolant for temperature reduction, enhancing thermal stability and reliability
RPM: 15,000 RPM
Utilize the principle of elastic strain measurement technology
Sensor signal output is available in various modes (frequency, analog, bus).
Signal and power are transmitted non-contact, without slip rings or brushes.
No need for zeroing and reversing to measure positive and negative torque.
The signal employs frequency output mode, boasts high signal-to-noise ratio, and excellent anti-interference performance.
Quick response, measurable starting torque, and transition process torque measurement available.
Unrestricted by rotational speed, capable of measuring real-time torque and power
Sensor linearity, good repeatability, high reliability, and strong anti-interference capability
The sensor features a compact structure, small size, and light weight, and is widely used in various online testing and industrial control systems.
ZH07-H Liquid-Cooled High-Speed Torque Sensor Dimensional Drawing
ZH07-H High-Speed Torque Sensor with Liquid Cooling Dimensional Drawing
ZH07-H Liquid-Cooled High-Speed Torque Sensor Mounting Method
Can be installed horizontally or vertically.
During horizontal installation, either rigid or flexible couplings can be used. The couplings should be tightly adjacent to the shaft shoulders at both ends of the sensor.
ZH07-H Liquid-Cooled High-Speed Torque Sensor Mounting Method
Sensor Installation and Usage Precautions
Absolutely no live installation; please disconnect the power during installation.
Do not directly strike or collide the sensor's end output shafts with excessive force during installation.
When the shaft coupler with a sensor has a heavy weight, a bearing bracket should be installed at the coupler section to prevent the sensor from bearing bending moment force.
In cases of significant vibration or coaxiality exceeding 0.05mm, pre-apply a flexible coupling, and ensure the base and pedestal are securely fastened.
Under favorable installation conditions and high measurement accuracy requirements, choose a rigid coupling, and the base must be securely fastened to the pedestal.
The base platform should have sufficient strength for installation and stability, to avoid excessive vibration.
This sensor is not waterproof or explosion-proof. Please note when using: (Customization available for special requirements.)
Ensure proper grounding in the sensor system and implement shielding and isolation for signals that may interfere with each other.
