National standard code: FPQ-35/6T-20

Other manufacturer codes for similar products: FPQ-35/6T-20

FPQ-35/6T-20, FPQ-35/5T-20, FPQ-35/4T20 composite pin insulators have high bending resistance, superior impact resistance, seismic resistance, and explosion-proof performance. The internal insulation is reliable and lightweight, making it an ideal replacement product for traditional electric porcelain.

Product Description: FPQ4-10/3T20 ◆ F represents composite; P represents needle type; Q represents anti fouling type ◆ 4 represents anti fouling level ◆

Detailed description:

Composite pin insulator

Composite needle insulators have high bending resistance, superior impact resistance, seismic resistance, and explosion-proof performance. The internal insulation is reliable and lightweight, making it an ideal replacement product for traditional electric porcelain.

《FPQ4-10/3T20》

F represents composite; P represents needle type; Q represents anti fouling type

◆ 4 represents the anti fouling level

◆

◆ T-iron cross arm; L-fiberglass cross arm; M-wooden crossbar

◆

◆ Color: Omitted as deep red; H-gray; G-green;

Types of composite insulator products

FXBW - Rod type Suspension Insulator

FPQ - Composite Pin Insulators

FZSW Composite Post Insulator

FS Composite Cross arm Insulator

FCGW - Composite Dry Wall Penetrating Sleeve

FQE (X) - Composite insulators for electrified railways

FQJ - Electrified road roof composite insulator

Usage conditions:

·Environmental temperature -40 ° C~+40 ° C

·AC power frequency not exceeding 100Hz

·Earthquake intensity not exceeding magnitude 8

·Altitude not exceeding 1500 meters

·Strong wind speed not exceeding 35m/s

Parameters of high-voltage line needle type composite insulator:

Product model Rated bending withstand load Structure height Small arc distance Small nominal lower thread diameter Rated voltage High voltage Power frequency 1min Wet withstand voltage Lightning full wave impulse withstand voltage

(KN) (mm) (mm) Creepage distance (mm) (KV) (KV) (effective value) not less than kV (peak value) not less than kV

      (mm)

FPQ1-10/2T16 2 240 110 300 16~20 10 12 40 90

FPQ-10/4T16 4 183 127 300 16~20 10 12 40 90

FPQ-10/3T16 3 260 184 460 16~20 10 12 50 110

FPS-105/5 5 250 173 380 16~20 10 12 42 105

FPQ4-1/3T16 3 155 85 180 16~20 1~3 12 18 45

FPQ3-10/4T16 4 210 130 320 16~20 6~10 12 42 95

FPQ3-10/5T18 5 210 130 320 18 6~10 12 42 95

FPQ3-10/6T20 6 210 130 320 20 6~10 12 42 95

FPQ4-10/3T16 3 245 170 460 16 10~15 12 50 105

FPQ4-10/4T18 4 245 170 460 18 10~15 12 50 105

FPQ4-10/5T20 5 245 170 460 20 10~15 12 50 105

FPQG4-10/5T20 3 330 260 700 20 10~15 12 50 105

FPQ4-20/5T20 5 300 215 600 20 20 12 65 150

FPQ4-35/2T20 3 400 320 835 20 35 12 90 210

FPQ4-35/6T20 6 450 370 1015 22 35 12 95 230

FPQ4-35/6T20 6 480 370 1260 22 35 12 95 230

FPS-105/5 5 230 180 380 16~20 10~15 12 45 105

FPS-105/8 8 230 180 420 16~20 10~15 12 45 105

FPS-150/5 5 300 215 600 16~20 20 12 65 150

FPS-150/12.5 12.5 325 215 575 16~20 20 12 65 150

FPS-170/12.5 12.5 350 240 650 16~20 20 12 70 170