Product Introduction

This instrument simulates the influence of flame in the early stage when ignition occurs around electrical and electronic products, so as to assess the degree of fire danger through simulation technology. It is mainly used for horizontal and vertical flammability tests on the relative combustion characteristics of plastic and other non-metallic material component samples, solid materials and foam plastics with apparent density not less than 250kg/m 'when measured according to ISO845.

This instrument adopts an original imported integrated chassis, with the control device located outside the box and glove operation holes on the glass window for easy operation without leaking smoke; The instrument adopts high-precision digital mass flowmeter, which can display numbers and bar charts, and has the characteristics of clarity, accuracy, and stability.

Product Parameters

The instrument has a CE certification mark when it leaves the factory

Compliant with standards:

■ IEC60695-11-3 (500W) method A

■ IEC60695-11-4 (50W) method A

■ New version of IEC60695-11-10 standard

UL94, ASTM D 5025 standards

Requirements of GB/T5169.16-2017

Test box:

■ Original imported integrated box body

Internal combustion chamber ≥ 1 cubic meter

The inner surface of the box is dark in color

Internal illumination less than 20Lx

■ Box glass door size 70 × 70cm

There are glove operating holes on the glass window

■ Easy to operate without leaking smoke

Combustion power (selected when ordering):

■ 50W type

■ 500W type

■ 50W integrated/500W integrated

Gas supply system: 965mL/min ± 2% (flame 125mm) at 23 ℃ and 0.1Mpa

Supply methane gas with a purity of ≥ 98% at a flow rate of 105mL/min ± 2% (flame 20mm)

Flame temperature rise time:

500W: Flame rises from 100 ℃ to 700 ℃ in 54 seconds ± 2 seconds

50W: Flame rises from 100 ℃ to 700 ℃ in 44 seconds ± 2 seconds

Test flame height: adjustable, with 125 * 125mm gauge and 20/40/125 scale