Xiangfu Rong Environmental ProtectionWe are an enterprise that integrates scientific research, development, design and manufacturing, sales and installation, and after-sales service. We specialize in producing integrated fiberglass composite material sewage treatment tanks, cement sewage treatment tanks (biological septic tanks), fiberglass water tanks, and fire water tanks.
The fiberglass water tank is made of resin as the raw material and processed with excellent molding technology, which has
Light weight, no rust, no leakage, good water quality, wide range of use, long service life, good insulation performance, beautiful appearance
Easy to observe, install, clean and maintain, and have strong adaptability, it is widely used in hotels, restaurants, schools, and hospitals
Industrial and mining enterprises, public institutions, residential buildings, and office buildings are used as public domestic water, fire water, and industrial water
The ideal product for water storage facilities.
1. During installation, a maintenance passage of no less than 800mm should be left between the box and the wall, and the top and bottom of the box should be no less than 500mm;
2. During civil construction, first prepare the concrete strip foundation;
3. After assembly, the outlet and drain pipes should be closed, and the inlet pipe should be opened. After filling with water, there should be no leakage for 24 hours
Qualified;
4. Provide construction power and inspect sealing water at the construction site.
Installation and debugging precautions:
The foundation of the water tank can be made of concrete strip beams or I-beams. A breathable air filtration device is installed diagonally on the top of the water tank.
Reinforcing bars are used inside the water tank. Each pipe flange is a 1.0MPa standard flange.
Scope of application
1. Fiberglass water tanks are used in ordinary residential buildings, commercial and residential buildings, office buildings, residential communities, government offices, schools, and liquor stores
Living and firefighting water supply for shops, etc;
2. Production and domestic water supply for industrial and mining enterprises;
3. Water for various types of circulating water, cooling water, and hot water supply systems;
4. Acid and alkali reserves.(such as pneumatic compaction), the backfill soil around the pool must be compacted.
5. Cleaning well: After the backfilling meets the construction specifications, a cleaning well (inspection well) can be built on the upper part of the pool body. There are two types of cleaning wells: brick built wells and prefabricated reinforced concrete wells. The designer can choose according to the specific situation. To prevent leakage from the brick wall of the inspection well, it is required to apply a 20mm thick waterproof mortar plastering layer on the inner and outer walls of the well (1:2 waterproof mortar, with 5% waterproofing agent based on the weight of cement). A 45 'slope should be applied at the corners with a thickness of 50mm. When there is groundwater, two coats of hot asphalt (or other waterproof coating) should be applied to the plastering layer on the outer wall of the well, and the soil should be covered to the floor requirements.
