The replacement of broken curtain wall glass and curtain wall glass is a technically difficult task in glass replacement construction. In addition to fully controlling the structure of the original curtain wall, one also needs to have rich work experience. Due to the breakage of the original curtain wall glass, if not careful, it is possible for broken glass fragments to fall and damage other parts of the glass, especially if the glass area is too large, making it more difficult to remove the curtain wall glass.

The removal of broken glass from the original glass curtain wall, the use of adhesive tape on the surface of easily broken glass to ensure that glass fragments do not fall, and the quiet removal of broken glass from the surrounding area. Use suction cups to remove the entire piece of broken glass and place it in a safe bucket. After clearing the debris around the glass, use a wallpaper knife to remove the sealant around the glass.

Take out the foam rod in the glue seam, remove the aluminum alloy glass fastener in the glue seam with a hexagonal wrench, four construction workers outside use suction cups to absorb the glass, three people inside also use suction cups to absorb the glass, lift the glass up inside and outside at the same time, the upper opening of the glass is outward, the bottom is toward the room, and gradually slide down until it lands safely, and the people inside use their hands to hold the glass.

The people outside came in through the window and safely transported the glass to the public second floor. Suspend the removal of the broken glass aluminum alloy frame, bond the glass and aluminum alloy frame together with two-component glass construction adhesive, cure the glass construction adhesive for 2 hours, clean the glass surface after curing, and safely transport it to the construction site.