Torque energy-saving wire clamp

Torque clampPGA-502low pressure/High voltage overhead bare conductor

Non load bearing connection fittings for electrical systems - used for connecting aluminum stranded wire or steel cored aluminum stranded wire,Connection between aluminum stranded wire and steel stranded wire,And the connection between copper stranded wires in non severely polluted areas.

Energy saving cable clampPGA-502Specially designed torque nuts can maintain a constant contact pressure between wires and clamps for a long time,And the torque line clampPGA-502Ensure that the installation of each wire clamp is in good condition and has a good electrical connection,And exempt the installation of wire clamps from human factors.

Wire clip body curved design,Made of highly corrosion-resistant aluminum alloy material,Both the clamp body and the screw have excellent metal elasticity,Together with the connected wires, it forms an energy storage system that breathes together. Greatly improved the cutting ability and service life of the wire clamp,Effectively reducing energy loss. Under the correct selection and use,The ability to withstand current will exceed that of the connected wires. Suitable for reducing wire connections and copper aluminum connections,Widely applicable and clearly marked,Minimize specification selection to the greatest extent possible. The screws have undergone special anti-corrosion treatment.

Under the correct selection and usage conditions,A wire clamp can be used during the connection construction.

The energy storage system of "breathing together",Reduce energy loss and extend the service life of power lines.

Numerous successful practices have proven,Torque energy-saving wire clamp - makes the connection perfect.

Typical Applications

1.Connection of overhead lines

2.Connection with cable system

3.Transformer outgoing connection,Meet the requirements of a large power supply

4.Used for equipment grounding

5.Connection of lines within the substation

6.High and low pressure lines(cable)connect

7.The overhead lightning protection line platform leads to the "Steel Stranded Wire to Steel Stranded Wire" connection

note:1.Suitable for reducing wire connections

2.Aluminum aluminum, copper aluminum, and copper copper transition connections are all possible

3.Under the correct selection and usage conditions,Only one wire clamp is needed for connection construction

4.If used for insulated wires,Optional insulation protection cover for insulation protection