Turbulent Sand Separator

Product Introduction of Cyclone Sand Separator

   The Cyclone Sand Separator is designed based on the screening principle of solid particles rotating within the separator, combining cyclone and filtration into one unit, achieving remarkable results in water treatment such as sand removal, turbidity reduction, and solid-liquid separation. It is widely used in industrial sectors such as water source heat pumps, water treatment, and food industries. Applications include sand removal from river and well water, washing coal water, industrial mineral processing, solid-liquid separation, liquid degassing, and separation of immiscible liquids.

Principle of Operation for Cyclone Sand Separator

   The Cyclone Sand Separator operates based on the principles of centrifugal sedimentation and density difference. When water flows tangentially into the equipment through the sand removal inlet under certain pressure, it generates a strong rotational movement. Due to the different densities of sand and water, under the combined action of centrifugal force, centripetal force, buoyancy, and fluid drag, the lower-density water rises and is discharged through the outlet, while the higher-density sand particles are discharged through the排污口 at the bottom of the equipment, thereby achieving the sand removal purpose.

   Under certain scope and conditions, the higher the inlet pressure of the vortex sand separator, the higher the sand removal rate, and it can be used in parallel with multiple units.

Product Features of Cyclone Sand Separator

1Simple structure, easy to operate, reliable in use, virtually maintenance-free.

2Compared to sand removal equipment such as expanded pipes and buffer boxes, it boasts advantages like a smaller footprint, higher processing capacity, and space savings on-site.

3Sand particles in the water during the uninterrupted water supply process.

4Eliminates the issue of secondary water pollution associated with other sand removal methods, with high sand removal efficiency.

Selection Considerations for Cyclone Sand Separators

   The selection of a vortex sand separator must consider factors such as the water volume to be treated, the diameter of the external inlet pipe, the working pressure of the pipeline, the quality of the raw water, and the required quality of the treated water. Generally, when choosing a vortex sand separator, prioritize larger model equipment under the premise of meeting the flow rate, and use several units in parallel to replace the large equipment in the system to achieve better solid-liquid separation.

注意事项 for Installation and Use of Spiral Sand Separator

1The cyclone desander should be installed on the main pipeline of the water supply network and securely mounted on a base. A bypass should be added between the inlet and outlet pipes.

2To ensure a smooth water flow into the equipment, a straight pipe of the same diameter as the inlet should be installed in front of the inlet, with a length equivalent to the diameter of the inlet.10-15Multiple.

3Ensure adequate maintenance space around the equipment during installation.

4During normal operation, the inlet and outlet valves should be opened, while the drain valve and bypass valve should be closed.

5Regularly remove sand and impurities from the source water based on its sand content, open the drain valve during discharge until clear water flows out, and the discharge process will not affect normal water usage of the system.

6After waste discharge is completed, close the discharge valve.

7If sand pressure is insufficient, close the valve at the outlet.

Turbulent Sand Separator Technical Specifications

1Inflow Turbidity: ≤320Degrees

2Turbidity of effluent: ≤10Degree

3Inlet pressure:0.2-1.2MPa

4Pressure Loss:0.028 MPa   

5Diameter: >0.1mm  

6Operating Temperature: Room Temperature

     Shijiazhuang Yindu Environmental Protection Co., Ltd. regularly produces: Cyclone Sand Separators, Conical Cyclone Sand Separators, Cyclone Cleaning Devices, Cyclone Sand and Filtration Separators, Air Conditioner Cyclone Sand Separators, Stainless Steel Cyclone Sand Separators, Centrifugal Sand Separation Filters, Sand Separation Filters, etc. The above are Cyclone Sand Separators./Detailed information on cyclone sand separators.