Stone processing workflow

One, Rough Blocks
Stone material processed from wool, with specific specifications, used for manufacturing decorative panel materials.
The process of "大切" involves cutting rough blocks into approximately the dimensions required by the customer for their sheet materials. The blade tips are made from corundum, and the thickness of the blades is...
The thickness is consistent, around 7-8 millimeters. The large blade is 3 meters long, while the small one is 60 centimeters. After the large cut, the finished product is composed of slabs sawn from rough blocks, also known as rough sheets. However, upon cutting the rough blocks, it was found that the quality of the rough sheets was not good. A layer of resin glue needs to be brushed on the surface of the rough sheets to fill in the small holes and cracks. If the weather is good, the resin glue will dry in just half an hour; if the weather is bad, it may take 1-2 hours.
An hour after the resin glue has dried, the large grinding can be performed. (Note: Whether the stone is good or not can only be determined after the large cutting.)