详情描述

One,Product Description:

PlasmaIgnition DevicePrimarily composed of explosion-proof plasma ignition units, high-voltage ignition wires, and plasma ignition guns, among other components. This product features a high-performance ignition circuit, offering stable performance and reliable operation.PrimaryIgnition for boilers with low gas values, gas blowout during oil drilling operationsCombustible and hazardous gasesOr the combustion of exhaust gases,It is a safe and environmentally friendly equipment designed to eliminate its environmental and safety hazards.

Section 2: Key Technical Parameters of Plasma防爆 Ignition Systems

1Operating Voltage: 220VAC 50Hz

2Ambient Temperature: -40～80°C℃

4Output voltage: 20KV.

5.Spark Energy 1000J...Power 1KW.

6.Operation Method; Manual.

7.Ignition Gun Tip; heat resistant up to 1200 degrees.

Section 3: Installation of Plasma Ignition Units

1.The explosion-proof box is mounted not far from the ignition point.Blast-proof boxes require waterproofing attention; cover them with waterproof and sunshade covers.

2.First, connect the high-voltage ignition cable to the plasma ignition box, then connect the plasma ignition gun. Supply the explosion-proof box with a 220V power source.

3.Press the 220V power switch button to turn on the power indicator light, manually ignite with the button; the plasma ignition gun automatically ignites at the front end.

4.The plasma ignition gun tip generates a plasma arc during operation, with an arc length of approximately 100mm, which can completely replace open flame.During operation, the plasma ignition gun must be grounded to its shell due to the high output voltage to prevent any unsafe incidents.。

5.Ignition rod installation (threaded connection) is quick and easy.Each section of the ignition rod bracket is adjustable in height after installation on-site; generally,1.5Meters (can be extended according to the buyer's requirements) Boilers do not require installation brackets on-site.

6.The connecting wires feature a mis-insertion prevention function.

7.Compared to standard ignition devices, they require higher energy release, stronger ignition capabilities, and electrodes that can withstand higher temperatures.

Four  Ignition Device Dimension:

1.Plasma Ignition Device Control Box Dimensions (approx.): 400×500×200mm

2.Ignition rod and attachment box external dimensions (approx.): 2000×100×200mm

3.Ignition rod diameter φ40mm.

4.High-voltage ignition connection cable: 5 meters. (Custom lengths available according to on-site conditions.)

Three,Ignition unit on-site installationIllustrative Simulation:

Ignition Device Connection Diagram: