Clean Sampling Vehicle

Clean Sampling Vehicle Product Overview:

The product is suitable for sampling of raw materials and auxiliary materials for pharmaceutical preparations and sterile preparations. It is widely applicable for sampling of raw materials in special occasions of industries such as preparations, electronics, precision instruments, meters, and food. According toGMPStandard requirements: The sampling vehicles produced by our factory reach a 10,000-class cleanliness level, and the electric components used are in compliance.GB1497-85(Electric Safety Standards); CompliantGB-191(Standard Packing) specifications. The electrical control panel of the clean sampling vehicle is equipped with a computer touch screen control, the fan is variable speed, with adjustable air volume. The clean sampling vehicle is fitted with an ultraviolet sterilization lamp. Other specifications and dimensions can be customized according to customer requirements or soft curtains can be added at both ends.

Clean Sampling Vehicle Description:

(One)A clean sampling vehicle is a vertical airflow local air purification device, which achieves a high-purity working environment by passing indoor air through pre-efficiency filtration and then through a high-efficiency air filter to exhaust.
This clean sampling vehicle is designed forGMPStandard requirements for design and production, cleanliness up to 100-level.-Million-grade requirement, suitable for use in cleanroom environments, commonly used in pharmaceutical preparations.(Excluding sterile preparations.)Sample of raw materials. The centrifugal fan and other main components of this sampling vehicle meetGB1497-87(Motor Safety Standards)Requirements: The product structure is composed of stainless steel plates or powder-coated steel plates.

(II)Usage Instructions: Move the clean sampling vehicle to the location where sampling is required, secure the sampling vehicle (apply the brakes); connect the power supply, turn on the power switch, and turn on the fan switch.,The fan starts up, adjusting the voltage to an appropriate level (usually)220V), awaiting the operation of the clean sampling vehicle15After a few minutes, place the sample bucket inside; upon completion of sampling, remove the sample bucket, turn off the fan and power, unplug the power cord, and return the sampling vehicle to its original position.

Note: Regularly measure the working area wind speed with an anemometer based on usage. If it does not meet the relevant technical requirements, adjust the fan air volume, and replace the high-efficiency or preliminary air filter as necessary.

Product Variety:Clean Sampling Vehicle,Clean Sampling Vehicle,Sampling Vehicle,Sampling vehicle,Purification Sampling Vehicle,Clean sampling vehicle,Mobile Purification Sampling Vehicle,Mobile Purification Sampling Vehicle

Style Description:

StyleAOverall steel plate orSUS304Stainless steel construction, with glass on both sides, hollow underneath without a countertop.

StyleBOverall steel plate orSUS304Stainless steel construction, with glass on both sides and a load-bearing platform below.

StyleCOverall steel plate orSUS304Stainless steel construction, with side panels and a bottom support plate.

StyleDOverall steel plate orSUS304Stainless steel construction, three-sided wall panels, with a downflow air shower system below.

1.Top mounted with integrated UV sterilization lamp and lighting lamp,High-Efficiency Sterilization,Create a clean and sterile work environment for you.

2.Adopt3Adjustable air volume control system with soft-touch switches to ensure the wind speed is always ideal.

3.Stainless steel perforated diffuser grille, ensuring more even air flow within the area.

4.Thickened glass observation panel, less prone to shatter than regular glass, posing no accidental harm to humans.

5.Eco-friendly antibacterial glass partition curtains.

6.TopG4Initial efficiency air intake filter.

7.Eco-friendly Antibacterial Glass Soft Partition Curtains

8.Sampling vehicle load-bearing platform.