Precautions before installing the dry powder mortar mixer:

Before installation, the dry powder mortar mixer should be prepared with all necessary raw materials and all tools and wrenches required for the installation process.

Before installing the dry powder mortar mixer, clear away all debris from the installation site. Clean all dirt and standing water thoroughly.

Does the crane have a boom? The lifting process requires the use of straps or wire ropes, and the weight of the equipment must be clear to ensure the safety of the lifting process. Alternatively, use a large forklift for loading and unloading.

Inspect the hoisting site environment, ensuring the hoisting height is 2 meters above the dry powder mortar equipment. Check for obstructions at the crane position and the rotation of the boom. Promptly communicate the equipment weight and boom extension height to the crane driver.

Hoisting equipment is installed under the guidance of the dry powder mortar equipment manufacturer. When hoisting heavy equipment, there should be ample installation experience, and a hoisting crew with high technical proficiency should handle the operation.

The fixed asset condition of the new machine, when large-scale enterprise equipment is ready for installation, a powder mortar mixer manufacturer typically sends one or two mentors to assist. They guide the buyer in finding local workers for the system installation. Therefore, we may learn from non-experts, possibly due to familiarity and carelessness, and thus, it's crucial to frequently check if the equipment screws are loose during the operation of the new machine.

Cleaning Method for Dry Mortar Mixing Machine:

When cleaning the dry powder mortar mixer, slowly rotate the bearing in oil, and it must be done meticulously.

Section 2: The cleaning of bearings in the dry powder mortar mixer is divided into coarse cleaning and fine cleaning. The metal mesh frame can be placed at the bottom.

3. During the coarse cleaning, use a brush to remove grease or adhesive from the oil. At this point, if the bearing is rotating in the oil, be mindful that foreign objects can damage the rolling surface. Qiangxin continues to produce other main equipment such as putty powder mixers, dry powder mortar equipment, and 200,000 tons per year of dry powder mortar production lines. Please feel free to contact us by phone.

Performance and composition of the dry powder mortar mixer:

1. The drum has excellent breathability, maintaining ventilation and preventing dust. The common practice is to connect a pipe at the top and cover the ground with a layer of filter cloth or a water tank. This measure is generally sufficient and cost-effective. Dust removal manufacturers offer roof dust collectors, which provide better results. The material position indicator can be used for material position warnings and bridge construction. The assist flow disk (vibration aeration blower) is suitable for sand silos.

2. Accurate Ingredients: Install pneumatic valves at the raw material storage and conveyor intake to achieve interlock. The valve at the screw conveyor discharge ensures the material flows freely and the screw buffer material does not enter the batching scale. The screw conveyor should be of the external bearing type, suitable for the construction materials industry.

3. Bucket Elevator: Large foreign objects cannot enter; for low-power bucket elevators, use slow feeding when introducing materials.

4. Blender: Pay attention to the order of sand fiber addition; otherwise, it may clump together. Avoid excessive mixing time; master the rhythm in the early stages. Replace the sealing strip of the discharge door regularly; a firm seal is fine. Needless to say, add oil to the reducer. When using the pneumatic door, be sure to adjust the cylinder stroke monthly; otherwise, the door may not close tightly. Mixing dead corners and incomplete discharge are issues with the blender itself; you can adjust the blades accordingly.

5. In the finished goods warehouse, some materials in the mixed finished products are prone to bridging. Bridging can be addressed by using airflow cushions or airflow disks (vibration-assisted inflation).