How to make barium sulfate protective

Shandong Yaoyang Brand Barium Sulphate Powdered Granules are used for interior and exterior wall decoration, effectively shielding X-rays and gamma rays. They effectively prevent the leakage of radiation, primarily used for the decoration of dental clinics, X-ray rooms, CT rooms, and other places requiring protection against X and gamma rays. Mixed with cement and other materials at a ratio of 25 to 50 kg per square meter, they achieve excellent protective effects. The specific dosage ratio is determined by customer requirements without affecting the color and aesthetic appearance. The wall thickness is approximately 3 to 5 cm. The product is mined and ground to meet low-carbon environmental protection standards. Construction Method:

Mix the crushed cement and barite particles thoroughly, then proceed with the standard construction process.

1. NewThe walls require a roughening treatment on smooth surfaces; walls without smooth surface treatment do not need roughening. 2. Mix the crushed barite particles with cement at a ratio of 3.5 - 4 to 1 (with 1 representing the amount of cement), and ensure thorough mixing. Depending on the construction conditions, a suitable amount of construction adhesive can be added to increase viscosity for easier application. 3. The thickness of a single coat of plaster should be kept within 1 centimeter.

4. If the total thickness of the plastering exceeds 1 centimeter, the work must be carried out in separate stages. It is advisable to allow a 24-hour interval between the two plastering stages.

5. A thickness of 1.5 centimeters equals...Lead PlateThe protective effects of quantity, the construction of barite crushed particles, etc.Applied a coatProtective Lead Sheets。 

After the barite crushing particles are installed, subsequent construction can proceed as per the standard construction procedure. The post-installation maintenance should also follow the same standard construction methods.