- AllProduct Category
-
Rock Triaxial Testing Machine
Load Testing Instrument
Direct Shear Device
Power Probe
Point Load Tester
Static Penetration Tester


详情描述
Our statically loaded probe, widely used in the geotechnical survey industry, is an in-situ testing machine. Its function is to press the probe (available in single-bridge and double-bridge configurations) into the soil layer, measuring the soil's penetration resistance with a resistance strain gauge or a static probe microcomputer.(Single Bridge)Or individually measure the cone tip resistance and side wall friction force (dual bridge), perform mechanical stratification of the soil layer, estimate the soil's plastic state or compactness, strength, compressibility, foundation bearing capacity, single pile bearing capacity, pile driving resistance, and conduct liquefaction discrimination. If equipped with a worm gear box and a cross-plate sensor (for cross-plate tests), it can also determine the undrained shear strength and sensitivity of saturated soft clay. The static probe micro-machine, when paired with a static probe machine, can automatically collect data from the foundation soil, print data sheets, curve graphs, friction ratios, and single pile bearing capacities, and can communicate with general-purpose computers. It is suitable for testing in soft soil, general clay, silt, sand, and soil containing a small amount of gravel. Particularly applicable in the engineering survey industries of construction, highways, railways, bridges, water conservancy, and electricity. It offers advantages such as low cost, quick returns, and low labor intensity for operators.
Key Technical Parameters:
1Transportation Type: Track Laying
4Power: Electric startZS1110Diesel engine,Power ≥22HP,RPM:2200-2600r/min
5Anchor Type: RACKED AUTO-ANCHORING MACHINES with front and rear anchoring function.
6Penetration speed:0.8-1.2m/min Rated Penetration Force200KN,
7Pick-up Speed:2.5m/min Lift Capacity220KN
8Work Medium:46#Hydraulic oil
9System Oil Pressure:14Mpa
10Fuel Tank Capacity:100L
11Contact Form: Block-style Insertion and Extraction
12Walking Speed: 25-40(km/h)
13Volume: 3.2*1.9*1.7(M)
14Net Weight: 3.5ton
15Operating Temperature:-10C O—40C

询价单











