- AllProduct Category
-
Rock Triaxial Testing Machine
Load Testing Instrument
Direct Shear Device
Power Probe
Point Load Tester
Static Penetration Tester


详情描述
Our statically loaded probe, widely used in the geotechnical survey industry, is an in-situ testing machine. Its function is to press the probe (available in single-bridge and double-bridge configurations) into the soil layer, measuring the soil's penetration resistance with a resistance strain gauge or a static probe microcomputer.(Single-span bridge)Or individually measure the cone point resistance and side wall friction force (dual bridge), perform mechanical stratification of soil layers, estimate the soil's plastic state or compaction, strength, compressibility, foundation bearing capacity, single pile bearing capacity, pile driving resistance, and conduct liquefaction discrimination. If equipped with a worm gear box and a cross blade sensor (for cross blade tests), it can also determine the undrained shear strength and sensitivity of saturated soft clay. The static probe micro-machine, when paired with a static probe machine, can automatically collect data from the foundation soil, print data tables, curve graphs, friction ratios, and single pile bearing capacities, and can communicate with general-purpose computers. It is suitable for testing in soft soil, general clay, silt, sand, and soils containing a small amount of gravel. It is particularly applicable in the engineering survey industries such as construction, highways, railways, bridges, water conservancy, and electricity. It boasts advantages such as low cost, rapid returns, and low labor intensity for operators.
Main Technical Parameters:
1Transportation Method: Track-type Mobility
4Power: Electric StartZS1110Diesel Engine,Power ≥22HP,RPM:2200-2600r/min
5Anchor Form: Ratchet-type automatic forward and rear anchoring machine.
6Penetration Speed:0.8-1.2m/min Rated Penetration Force200KN,
7Lifting Speed:2.5m/min Lift Capacity220KN
8Operating Medium:46#Hydraulic Oil
9System Oil Pressure:14Mpa
10Fuel Tank Capacity:100L
11Push-in/pull-out block style contact
12Walking Speed: 25-40(km/h)
13Volume: 3.2*1.9*1.7(M)
14Net Weight: 3.5ton
15Operating Temperature:-10C O—40C

询价单











