KHJ1/24 Mining Emergency Lockout Switch

KHJ1/24 Mining Emergency Lockout Switch

I. Main Applications

The KHJ1/24 mining emergency interlock switch (hereinafter referred to as the interlock switch) is one of the main protective devices for belt conveyors. It is suitable for environments with explosive gases and dust, but it must be free from mediums that can damage insulation and corrode metal. In the event of various unexpected failures along the conveyor, operators can pull the rope along the conveyor to activate the interlock switch, achieving the purpose of stopping the conveyor. The conveyor can only be restarted after the fault is resolved and the manual lock is released.

II. Environmental Conditions for Use

The lock switch should operate reliably under the following conditions:

a. Environmental temperature: -10～+40℃

b. Average relative humidity not exceeding 95% at (+25℃).

c. Atmospheric Pressure: 80～106 KPa

d. Applications with no significant vibration or shock.

e. Coal dust explosive mixtures are present in the underground coal mines, but there are no corrosive gases that can damage insulation.

Section 3: Explosion-Proof Styles

Explosion-proof Type and Marking: Mine Used Intrinsically Safe Type, Mark: Ex ibⅠMb

Four: Model Meaning

Five: Dimensions, Weight, and Installation Sizes

a. Dimension: 189mm x 128mm x 101mm

b. Weight: Approximately 2 kg.

c. Installation Dimensions: Fixed screw center distance of ±1 mm from 50 mm

Six, Outline Drawing

Section 7: Technical Data

a. Stroke Range: 15° to 60°

b. Actuating Force: (40-200) N

c. Reset Force: (10-100) N

d. Contact Rating: DC24V/1A (Resistive Load)

e. Cable Diameter: Φ12mm

f. Quantity of outlet spout: 2 pieces